What Have You Done To Your 2nd Gen Tacoma Today?

Looks like it’s perfectly level. Are you running the leaf pack from the 2019?

 

Actually it matches some other orange trim on the truck

 

Order five lug fenders.

 

Did you regear yet?

Edit: what tires did you go with?

 

Kid

thx for the link to the Chemical Guys........they have a lot of stuff.......

Foam Cannon from Amazon looks interesting

 

Thanks for choosing us!

 

Negative. I have a buddy at Toyota that told me not too. Here is a picture from a little further back. With the new suspension and wildpeaks this this rides smooth

 

Popped my air hose while I was plugging a coworker’s tire. Glad it happened here and not in the middle of nowhere. Thinking of going with the braided viair hose this time, any recommendations?



https://www.viaircorp.com/air-hoses/30ft-coil-hose-pu-inside-braided

And before anyone says anything, the plug is a temporary repair to get them to a shop after work

 

My Nfab nerf bars were starting to rust after being on for a couple years so I decided to take those off last night. Man, those bolts get rusted. I snapped 2 and somehow didn't destroy my knuckles, so it ended up alright.

After going back and forth with different headlights, I settled on the TRD Pros which I should have just done in the first place.

2 things left to do, kick ass speakers and remove the roof rack and do black vinyl up there. Then I think I can chill for a while until it comes time for new tires.

 

How you did that partial tonneau cover? I have a low profile tool box in my truck and I want to use a cover for the rest of the bed.

 

I’ve been wanting to pull the clear rock guards off mine because they look like crap. Did you use a heat gun to pull them or what?

 

How do you like that rear bumper?

 

Short bed tonneau w/ 12" wide tool box

 

get a pressure washer and a real foam cannon. You will be amazed how crappy that chemical guys ones is.

 

RCI sliders have arrived!

Also, took care of some surface rust before bolting these suckers on.

 

Yeah. I don’t mind the look at all. In fact I prefer the naked fenders with holes over the stock fender look.

 

No sir. I can’t drop all that cash at once. Regear is happening next though. Just saving up slowly for it. Meanwhile I have a @SOS CONCEPTS bumper on order and also hammer hangers on order

 

MILESTAR Patagonia D load 315/75r16

 

It's a must for sure. I had to wait a miserable three weeks for my regear. These trucks are gutless enough without throwing the addition ~55lbs per corner at em

 

For what it’s worth, my 35s are only 10 pounds heavier than my 33’s, with a total of 85 pounds per corner and even on 33’s with all my current steel armor, on my truck does great. Also lucky for me my commute is about 3 miles round trip