Ontario BS Thread

@Norilsk

That 2 door gladiator you want, with a flatbed

 

Mount a GoPro pointed at suspect areas and see for yourself?

Due to the UCA's inclined hinge line, the tire position shifts forward when the suspension is in droop, and shifts rearward in tuck.

 

You guys were talking about toyota factory dash cam this whole time?
I thought the aftermarket ones would be good enough 5x cheaper too

 

??

 

I noticed the exact part number seemed to be omitted.

 

Fine,
Lazy CUNTs
http://lmgtfy.com/?q=Tacoma+world+3rd+gen+subaru+tweeter+mod

https://www.tacomaworld.com/threads/how-to-subaru-toyota-3rd-gen-tweeter-upgrade-holy-s.540548/

$107 Subaru Genuine Tweeter Kit Kicker WRX STi Forester Crosstrek Impreza H631SFJ101

https://www.amazon.com/Genuine-Subaru-H631SFJ101-Tweeter-Kit/dp/B00PV6F8I2

 

I think it'll need to be a head on collision and you gotta blame Toyota and the truck.

 

Says the guy with no build link, no documentation on what he has done.

 

I do have

But otherwise, i dont know how to...

 

Go here

https://www.tacomaworld.com/forums/3rd-gen-builds-2016.196/

Make a thread, and start spamming it with all the things you have done and do to your rig.

You can look at mine I spam it a lot. @tacoma16 has a good one

Link for mine is in my sig, click the hungry cookie monster

 

No. We were shooting the shit about the factory camera on the windshield used for lane departure warning.

The Toyota accessory dash cam requires scotch wire taps; it isn't even plug 'n play. I wouldn't recommend it. Just get a Blackvue with front and rear cameras.

 

I went with a papago s780 1080 front and rear.
It's a little pricey at $250 but the low light sensor is useful since we have total darkness past 5pm for 8 of the 12 months.
That and it was the only dual setup i found at a box store. I dont trust my neighbours for ordering crap online

 

It's not settling it's wearing lol.

Over the years they just get lower as the spring fatigues. Not saying by a lot. But could be enough where you suddenly rub where you didn't.
And as you add weight

 

Do any of you guys have taco lean and if so how bad is it? I have my driver sitting 1” lower than my passenger. It’s kinda noticeable outside but I can’t notice it in the ride. The new leaf packs definitely makes it more noticeable than it was before though.

Is it worth getting one of these and throwing it on? I’m grabbing some 881s and nitrochargers too and I’m thinking I might need a 1/4” spacer on the front as well.

 

In that short period of time tho? I would have thought after a few years or so
Thinking about adding the spacer that corrects the taco lean. Should help it

 

Thinking of getting one now just cause I started rubbing

 

Lol correction I was talking about the front

 

Yeah I actually read your post and because mine had been rubbing too I measured and was like wait a fuckin minute lol. Now I can’t not see it.