BUYER BEWARE: 3rd Gen Plug-N-Play Tailgate Bolt-N-Lock & Tailgate Bolt-N-Open

What's the time frame looking like for the current order list?

 

Yes. I can go ahead and send you a new one if you do not have needle nose pliers where you can adjust it. Would you like me to send you a return label for the rod or would you prefer to just send me a picture of the receipt from the post off when you return the rod and I can send you a refund through PayPal?

 

Currently working on the Complete Full Packages. I believe I have a little over 15 of them done. I will see how many I will get done by Friday and then ship them out at the end of the week.

 

Currently putting some COMPLETE FULL PACKAGES together and then dropping them off at the post office for Monday shipping. Last little piece going in the Kit before they get sealed up...

 

Will the Tailgate Opener require an additional PnP Harness for install?
Will it be an add-on package, where the user will have to add the additional lines to the connectors?

 

I would like to purchase the tailgate opener, just let know how to do it!!!!

Thanks

 

Either this weekend or on Monday I will be posting the prices on the first page. I will also make an updated post that I have released the pre-order list for those that are wanting to make their payments for the Tailgate Opener

 

PM'd and paid for Complete Full Package. Thank you!

 

Agh, this little crew broke while trying to unscrew it, anyone had this problem? Where can I purchase new one...? searched up but could not find anything.
Thanks in advance!

 

Which part broke? Sorry to hear this man. Easiest way on this section is to unscrew that little hex Screw and then pop off the black plastic section piece so you can slide it out of the locking mechanism and then slide the little rod over the top. Then you can put it back and then re-tighten the hex screw.

 

Stupid me was trying to remove this one haha

 

I cover all of this in my write up but there will be options for you guys. It is not an additional harness. It is the same one but there are additional pieces that need to be added, yes. Either the user or myself

 

Oh man...I have no idea. Hopefully someone on here will be able to offer some assistance.

 

Start around here.

https://parts.olathetoyota.com/auto...rim/3-5l-v6-gas-engine/body-cat/tailgate-scat

I'd start here and browse through also purchased section, you'll be able to track down the exact parts number.

 

Installed mine today. 45 minutes later my tailgate locks. Great product. Thanks again @KTJO 4x4

 

Finally got around to installing but unfortunately the wire is about 8-12” too short? I pulled it as much as possible and the end of the wire barely reaches the bottom of the boot under the passenger side. I have a DCLB if that matters.

 

You are Welcome! Yeah it doesn’t take that long once you get going. It’s pretty quick which is what makes it nice having it be PNP

 

2ft short???? If that is the case, I say take it off and send it back because that’s not right at all!!!!!

You should be able to install the cable following the below path:

 

Maybe its 8”-10” short? I don’t know. I will check again and take pics of how i routed and compare with your pictures

 

Sounds good. Yeah this is the route you should have taken. Let me know