1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Shutter when backing up and turning

Discussion in '2nd Gen. Tacomas (2005-2015)' started by Tacologist, Jun 18, 2019.

  1. Jun 18, 2019 at 4:41 AM
    #1
    Tacologist

    Tacologist [OP] Well-Known Member

    Joined:
    Nov 21, 2010
    Member:
    #46495
    Messages:
    364
    Gender:
    Male
    First Name:
    Bob
    Tenessee
    Vehicle:
    05 Double Cab Shortbed
    Rear leaf suspension. Home done tailgate re-inforcement.
    My 2005 Pre Runner double cab V6 with LDS rear end developed a shutter when slowly backing up and turning to either side.

    I checked the brakes to see if they were grabbing and there is no indication of that happening.

    When I take the truck out of gear and let it coast in neutral, there is no shutter so I am thinking either a drive shaft condition or a problem in the rear differential.

    The rear end gear oil has been kept up with 75W -90 synthetic with a friction reducer additive and all was good when I did it about 3000 miles ago.

    Any ideas from the hive?
     
  2. Jun 18, 2019 at 5:25 AM
    #2
    badger

    badger Well-Known Member

    Joined:
    Jan 6, 2012
    Member:
    #70102
    Messages:
    2,128
    Gender:
    Male
    Vehicle:
    07 SR5
  3. Jun 18, 2019 at 5:48 AM
    #3
    Tacologist

    Tacologist [OP] Well-Known Member

    Joined:
    Nov 21, 2010
    Member:
    #46495
    Messages:
    364
    Gender:
    Male
    First Name:
    Bob
    Tenessee
    Vehicle:
    05 Double Cab Shortbed
    Rear leaf suspension. Home done tailgate re-inforcement.
  4. Jun 18, 2019 at 9:55 AM
    #4
    Nate-O

    Nate-O Well-Known Member

    Joined:
    Jun 27, 2016
    Member:
    #190670
    Messages:
    143
    Gender:
    Male
    First Name:
    Nate
    Vehicle:
    PreRunner
  5. Jun 18, 2019 at 2:49 PM
    #5
    Dimestore55

    Dimestore55 Well-Known Member

    Joined:
    Sep 20, 2016
    Member:
    #197833
    Messages:
    1,127
    Gender:
    Male
    First Name:
    William
    Richmond, VA
    Vehicle:
    2007 TRD OR Prerunner DCSB
    While you're inspecting everything have a good look at the u-joints. I had a similar issue and recently looked underneath to find one of the joints about a hundred miles from exploding :eek:

    I replaced it and it not only eliminated the back up noise but also cured a horrible shudder in the road from 45 - 60 MPH.
     
  6. Jun 19, 2019 at 5:51 AM
    #6
    Tacologist

    Tacologist [OP] Well-Known Member

    Joined:
    Nov 21, 2010
    Member:
    #46495
    Messages:
    364
    Gender:
    Male
    First Name:
    Bob
    Tenessee
    Vehicle:
    05 Double Cab Shortbed
    Rear leaf suspension. Home done tailgate re-inforcement.
    OK, I solved the shutter problem. It seemed to start shortly after changing the rear end fluid to Car Quest 80W-90 full synthetic from Auto Zone and adding a bottle of Trans X along with the change. I have used Trans X and Valvoline conventional 80W-90 fluid on all my former changes (30K 0r less) since the get go.

    With that in mind, as well as drive line problems and differential problems as a possibility, I decided to choose the easiest and fastest route first and that was to go back to my original method of Valvoline and Trans X.

    After the dump of Car Quest and change to Valvoline, I backed out of the driveway and left the shutter behind. It is gone.

    Just a heads up to all who, like me, felt that synthetic fluid is the best of the best. It may be, but not in all cases.
     
  7. Jun 19, 2019 at 6:21 AM
    #7
    Nate-O

    Nate-O Well-Known Member

    Joined:
    Jun 27, 2016
    Member:
    #190670
    Messages:
    143
    Gender:
    Male
    First Name:
    Nate
    Vehicle:
    PreRunner
    Glad you got it sorted out. :thumbsup:
    Something else that is good to do after changing the rear dif oil is to find a parking lot and do 5 or 6 figure eights to make sure the new oil and LSD additive are mixed together and to get all that fresh oil spread over the clutch pack.
     
  8. Jun 19, 2019 at 9:05 AM
    #8
    4WD FTW

    4WD FTW Well-Known Member

    Joined:
    Dec 7, 2016
    Member:
    #204287
    Messages:
    286
    Gender:
    Male
    Vehicle:
    '08 DC LB 4x4
    Icon Suspension Kit Pelfrey Bumper and Skid 4.56 Gears Detroit TruTrac Rear Archive Hammer Hangers Deaver U402 Stage 1
    Lol my truck did this when I bought it off the lot. Used it to talk down the price. The mechanical LSDs are annoying imo. They will eventually wear out and then you're stuck sourcing a replacement from a junkyard. I'm a big fan of truetrac lsd and the like
     
  9. Jun 19, 2019 at 9:45 AM
    #9
    Tacologist

    Tacologist [OP] Well-Known Member

    Joined:
    Nov 21, 2010
    Member:
    #46495
    Messages:
    364
    Gender:
    Male
    First Name:
    Bob
    Tenessee
    Vehicle:
    05 Double Cab Shortbed
    Rear leaf suspension. Home done tailgate re-inforcement.
    Yup, did that too.
     

Products Discussed in

To Top