OME 2885 springs definitely sag over time, lift settled 48%-58% since new

brand new truck, why cheap out on the suspension if changing it? Coilovers will let you adjust to your liking.

 

Increasing positive scrub > increases wheel length > lowers motion ratio > lowers wheel rate(effective spring rate measured at the wheels).

Motion ratio=arm length/wheel length
Wheel rate=spring rate x motion ratio^2

 

I keep telling you, you listen to me more, you live longer.

 

Considering the pro is ~1" higher in the front than the OR and the way yours looks now, I feel confident that you've still got more than a 1.3" lift up front. Try taking the picture with the truck in the same place, the ground level looks different in both pictures.

Either way, I hope I end up with something similar to your June pic.

 

Thanks! Well, remember the pics are with .25" strut spacers (~.5" lift) also. It's just under 2" probably.

 

The problem is that these 3rd gen trucks need 650-700# springs to not sag. There is a reason the stock coil on those squishy valves Billys are 700#

 

You're right, forgot that.

 

Fixed my problem.

 

What did you do to fix the problem?

 

4" front spindles and added an add-a-leaf on back to level back out.

 

What a load of shit. what does OME say?

 

I'm going to send springs back. We'll see.

 

Sub'd

 

Doesn’t it affect ride quality and integrity once you lift above 3”?

 

Lolz

 

He's 2wd.

 

Thanks for doing that. The other thing throwing my eyes off is that the 2019 pic has different rims and tires, filling the wells more.