SOLD OME 885 coils with Bilstein 5100’s

OME 885 coils assembled with Bilstein 5100 shocks. Bought them brand new and assembled from Wheelers Off Road back in November and they only have 2600 miles on them. Removed this weekend and replaced with heavier coils to handle a winch and bumper I will soon be installing. Paid $457 with assembly plus shipping. $300 plus shipping. Located in the Indianapolis area.

Edit: Local pick up preferred but will ship.

 

Let me know if you change your mind about shipping.

 

I looked into shipping factory suspension both front struts and both rear shocks to California and it was $99 and change. This would be similar in cost to ship I assume.

 

If your still interested let me know your zip and I will check shipping on Monday. Thanks. Brian

 

Did you install
The heavier coils yet? What are they and what lift did they give you?

 

Went with OME 886 coils and Bilstein 5100 shocks. Not sure on the lift exactly. I have Bushwackwacker flares so my measurements aren’t going to be the same. Go to wheelers off road website and it tells you the basics. About 2 inches of lift is what I wanted and by the time it settles that will be close to what it is give or take. So far no funky vibes or anything. I did do the ECGS clamshell bearing awhile back for preventive measures. 265/75/16 tires no rubbing. A little nose high but should settle in about right I hope. I ran them for a couple weeks before installing the bumper and winch and it wasn’t a bad ride at all to me just a little higher in the front if you like the California lean look of the ass dragging a little. Not the look I want and it should be level after it settles in.

 

I am, thanks. My zip is 97223. My phone crapped out on me yesterday and I’m on vacation in Maui, so I’ve got limited ways to be in touch. I’ll be back on the mainland Thursday 6/27.

 

I will look into. No worries

 

Sold