3rd gens with aftermarket wheels & NO LIFT

Leave it alone

 

Not for everyone. Poor wet weather performance.

 

I drift my 2018 taco with 33” k02 on the pavement in the rain and it does fine!!!

 

So minimal in my case to not worry about. It is about a 3% difference, Speedo at 80, actual will be about 82. There are calculators online that you can plug in various sizes and see the difference.

 

Doesn't it also affect your actual mileage on the engine?

 

It’s 0!

 

17”x8.5” Ray 10s with 265/70/17 Wildpeak AT3s

 

Stock OR suspension and tire sizes. Don't feel the need to lift although I'll likely change out the shocks eventually.

 

I’m running 285/75 KO2s on my stock Pro.

 

The guys at discount tires ordered the lugs for me. They thought that black lugs would look good em and the really do. I have the box with old lugs in em but theyre duct taped and i dont feel like taking the tape off.

 

I’m looking at a similar set up, what’s the offset on your wheels ?

 

Adding my contribution to this ongoing thread...
2019 Tacoma TRD Sport, not 4x4, no lift.
Helo 878 Wheels - 17x9, -12mm offset
Nitto Ridge Grapplers Tires - 265/70r17
Getting some rubbing on the front mud flaps on full turns — going to mod the flaps or replace with aftermarket (or remove altogether, not sure).

 

My setup is pretty much the same - getting some rubbing on the front mud flaps. How/where did you trim and was it a total fix or are there still rubbing issues for you? Thanks!

 

SCS Stealth 6 17 X 8.5 -10mm (Stock suspension)
BFG KO2 265/70/17

Had to remove front mudflaps due to tire rubbing at full lock, still has minor tire rubbing when the front suspension dips.

 

I trimmed where my mud guards overlapped the inner fender. I cut so the bolt from the bottom still attached, then next to the lower bolt from the wheel well.
Seems to have got almost all the rub. I spotted a small bit of clean spot in the mud from this weekend, but I gave it a pretty good workout in the mountains.

 

Noice.

 

Those are sweet! Truck looks awesome!

 

Thanks! I’m super stoked on the look - was better than I hoped!

 

No lift YET! Saving up funds to purchase a KING kit and state48overland is gonna hook it up, getting my sliders from them aswell in 4 to 6 weeks, just got the truck on june25th, Had these wheels and tires on my 2nd gen before it got totaled, glad I could take them off at the collusion center! Thanks discount tire on 75th and bell, 150$ to swap tpms and labor 17x8.5 wrapped in 265 ridge grapplers for now until lift

 

This is my dream truck except with a V6 4x4 and change the chrome bumper and chrome grill bezel. That looks so good with the debadge. What's the back look like?