Prinsu vs Victory 4x4

Booooommmm

 

@gradyk33

If you haven't already moved on the Prinsu, the Victory 4x4 is an alternative. They say they now have a DAI compatible rack.

 

Anyone else concerned about the stripping piece on the fairing rubbing on the paint? I didn't think there'd be actual contact with the roof.

 

You could use some 3M paint protection tape under the rubber if you were worried about that. Cheap insurance

 

Racks shipping every day at this point

 

I don't see a great way to make those strong enough to support the kind of weight we design the rack for. I use an Access roll-up cover and it works great for my application.

The only other way would be to have the rack hang over the sides of the truck, so still not ideal.

 

Awesome! Mine should be here this week! Will post install pictures soon

 

Installed!!! Everything went smooth!! Only one minor issue, not enough nuts, picked some up at Home Depot, and one of the truck roof mounts for some reason was not letting the bolt screw all the way in, tried several other bolts, so that would be a Toyota thing! Great quality, beautiful rack, love it!!

 

I’m in the process of installing mine and having that bolt issue as well. One of the bars is not allowing one bolt to screw in. What did you use instead?

 

Nothing yet, put the bolt in as far as it would go, then put silicon around it, temporary fix. I'm going to try a size down bolt or a shorter one, not sure what else!

 

Thanks sorry, might have misread. I’m having issues with one of the cross bars not accepting one of the button head bolts. Your install came out great btw!

 

Thanks, those worked for me, for me one of the

Did you try a different button head bolt

 

That will be today’s project. Started late last night. Too excited to get it started.

 

Did you vent the sunroof, too?

 

Man that looks good, cant wait to get mines. Does that foam piece on the front fairing come with the rack?

 

Probably just a bad weld nut in the roof? You could do a few things, get an m6 x 1.0 tap and carefully try and chase the threads (don't break the tap in there whatever you do!) or find a shorter M6 1.0 bolt. Home Depot carries stainless hex heads which will work fine. If you can't stand one mismatched bolt, you will probably have to order the button head online unless you have a good hardware store or fastener store near you. I'd mail you one, but all we carry currently is the length we send in the bolt packs.

We talked via PM but again, sorry about that! Let me know if that tap doesn't work.

You can vent the roof without any problems

 

Thanks, and yes it did!

 

Yes, works great, doesn't touch

 

Thank you, will try those options!!

 

@monkeyevil Did the logo change? It looks like it was cut out in the earlier pictures and now it looks like a decal or silkscreened. Also are you planning on doing a 4th of July sale?