1st Gen Lunchtable Thread - General Discussion

Hmm. Wait I might be thinking of the a343

 

Truck randomly seems to lose power. So driving along turn on the headlights, truck goes dark (needles drop all the way, odometer doesn’t display anything, radio restarts), or go to start the truck turn and nothing, back to off and truck starts right up. Guessing a short/grounding issue, since it only happens when the electrical load increases.

Oh yeah, all this caused by a Tesla backing into my parked truck. Per Tyler that is a actually somewhat of an accomplishment.

 

I’ve got no idea. I know the torque converter is different.

 

The A340x transmission body is the same. A340E, A340H, A340F.

 

was all the damage down low? its possible you have pinched wires somewhere if not.. i believe the wire harness for the fuse box runs under the core support (above the radiator).

 

Yeah hit dead center right on the bottom of the front plate. I’ll take a look for sure, thanks!

 

current state of my storage unit? 2 front diffs (3rd under the truck) 2 transfercases (1 on the transmission at home) 1 set of 4runner wheels with bfgoodrich rugged fails, 2 full size spares, and 2 elocker diffs in boxes plus a 8.4" diff in a box

 

almost forgot i have a complete spare elocker diff under the truck too.. with gears and all

 

Can you be a dear and take a picture of the front without the electronic actuator, I want to make sure the vacuum and electronic actuator tubes are the same.

 

So the hill was really steep, dude tried to parallel park but didn’t cut it right, thought he shifted out of reverse and punched it, thus while only a foot or two of distance had some noticeable damage, Tesla Model S P100D has some serious torque and weight (about 1,200 more pounds than the Tacoma)

 

im not there right now, but i believe the tubes are the same. just actuator differences

 

$200 shipped for 8.4 diff

 

uhh. do you need it to be a good diff? its got a bad pinnion bearing

 

@cruiserguy that 6x6 looks expensive af

https://www.instagram.com/p/BzH2URJp2ZP/?igshid=19f3fcq9plv4k

 

It’s a sad day. The Honda is gone.

 

guna finally weld up that front bumper now?

 

I would probably weld the carrier and have it regeared before it went in

 

PM me info and i'll see how much of a bear it'd be to ship.
its out of a 05 sequoia so i believe its a 4.10 gear ratio

 

I've heard they fit well in 5 gallon buckets