FS: BeachBurner CAP Rack Plates for Short and Long Beds

Shortbed plates I can pack up and ship to you today, but we're still a month or two out with our mounts. We are submitting for manufacturing quotes this week and should have a better idea of timing once those come back. Once we have a run of prototypes completed, we'll do some more intensive testing (weight limit, wear & tear, etc) before we make them available for purchase. The last thing we want is an unforeseen failure resulting in damage or injury, so we want to make sure we get this right. We'll keep posting progress in this thread:
https://www.tacomaworld.com/threads/beachburner-ovrlnd-racks.591482

 

shipped to 94565 for short bed?

 

Shipping comes in at $33.30 - might come down a couple of bucks if you opt to not include crossbar hardware.

 

Ok thanks.

 

Bump! Still some shortbeds available

 

Got the rack built and installed.

 

looks fantastic!

 

Anymore LB plates available?

 

I am looking for clarity on the Prinsudesign feet referenced. Are these the feet people have used to mount from a yakima track on a cab high canopy to the barnburner top rack to match a prinsudesign front height wise?
One of your posts talks about using Prinsu mounting feet for your rear cab rack. Are these the feet you used to match up barnburners side rails with the prinsudesign front rack?
https://prinsudesignstudio.com/product/1-tent-mounting-feet/

 

You could do a number of things: one is the mounting feet from Prinsu, Smittybilt adjustable mounting feet from Amazon, custom aluminum square tubing as some of us has done, and lastly wait patient for for @Barnburner's adjustable mounts.

I opted for 1 inch square tubing because i want it to match my rack's height. And yes all of the mentioned options mount to thule/yakima style tracks.

 

Still have 5 more sets of Shortbed plates ready to go!

 

Make that 4 i am placing an order now.

 

Awesome - I'm prepping your invoice now - thanks Derrick!

 

can you shoot me a link for ordering the 80/20 cross bars that the correct length? Thanks in advance and yes i know i am being lazy

 

No worries - I snagged mine from Tnutz.com.
https://www.tnutz.com/product/ex-1020-black/
You might want to double check and measure your cap for how wide you'd like to go, but most people go between 45-47in long. Make sure you get it tapped for 1/4-20 on both ends too.

 

roger, your invoice is paid and 50" long extrusion bars are on the way

 

LB plates please!

 

Just ordered a set of SB plates.

 

Is there any way to get a notification when the long bed plates are ready? I am ready to buy and don't really want to pay the extra cost for Prinsu. I just need the plates. I have the mounting/crossbars covered.

 

Just shot you your invoice!

I've been keeping note of who's interested in LB plates and will attempt to notify everyone once we have them stocked again.