Need Help With Icon 1.5" Pack Please

Hey guys, just got to the point of putting everything back in. I would like to keep my factory overload as I mainly use the truck to tow and haul crap around. I've run into a problem with the overload spring having the mount for the brake line attached to it interfering with the icon pack. The bottom of the picture below. Should I cut that off as well? Thanks.

 

https://www.tacomaworld.com/posts/20170836/

 

Thank you, I scoured so hard to try and find something. Awesome

 

Yep, drill it out and beat the part off with a BFH as shown in the updated part of the thread.
https://www.tacomaworld.com/threads/selecting-a-mild-lift-trd-baja-tx-pro-icon-aal.385619/

 

Thanks to both of you. Used a sawzall in place. Cut the heads flush and hammered them right off. Worked like a charm. Trucks back together, tackling the fronts after the weekend. It sits way higher than I though it would. Can't even imagine what those 6 inch lift guys trucks look like in person.