Tacos in St. Louis area

I would but my ass has to be at the airport at 5

 

Damn it. I’m in KC.

 

This TC spindle bushing won’t move, any tips?

It’s looks and feels like aluminum as a punch from the bottom just digs into the material instead of moving it.

 

Heat maybe?

 

Tried it, have them in the shop freezer right now.

 

Maybe the pickle fork?

Take it back, start of with a chisel and work your way around it, put it on the table vice for support

 

Too big to fit sadly.

 

Dnt have a small chisel? Or a punch, knife fork, any metal that can get under it

 

Put a chisel onto it that fit perfectly and it just started cutting the material.

 

Ok, how about using a vice grip put a towel of some sort around the bushing lock the vice grip on it, use the table vice for anchor and start rotating it back and forth to try and break the rust, apply penetrating oil as you go..

 

my current mod in progress-
i am getting this stenciled into the LineX liner, right under the rear window that matches my tailgate decal
the proof looks like this, ?perhaps it should be a bit longer, taller? to fit 'just right' ... this LineX is permanent lol
... if it was your Tacoma, what would you do

 

Sorted, stuffed the old spindles in the freezer for awhile and that did the trick.

 

You got thwt while waiting on the spindle in the freezer?

 

Cousin left his 87 with me while he’s in Korea for the next 2 years. Was playing with the idea of just storing it, but may just use as a daily since my drive to work is 2.5 miles each way.

 

Get a meepo mikeyno one will say anything on base

 

Or a razor

 

Imagine him rolling into work on a Honda Rukus.

 

Got to meet a few guys from KC today.
They’re definitely in on a Midwest meet. Or Missouri meet.
It was suggested that we do mark twain again. Definitely going to have to go back down there and do some recon for different routes than last time.
Good to meet @Sociopenguin @ResearchMonkee and @Slashaar