TRD Pro & TX Baja OFFICIAL Thread...

Lol....that’s awesome.....could’ve been a bad mistake.

 

Holding brakes rolling on flat lol

 

The 4.88s are amazing!

 

Fuck yeah! People will only know it’s King’s if they do a cartwheel

 

So, how are they..? And I cant remember if you already said or not, but what model did you go with?

 

I haven’t actually yet lol. Noticeable difference over the Icon’s: softer over bumps, only con is the body sway on turns. With the Icon’s, man it would corner. I suppose it’ll help me slow down and drive a little more cautiously lol. I can’t wait for it to fully settle. I bought the set off a local member who had them valved at Accutune. Here were his descriptions:

- (25001-119): King 2.5 Front Remote Reservoir Coilovers w/600lb. Springs Extended Length without Compression Adjusters - (valved by Accutune Offroad for Tacoma running no additional weight, daily driving and occasional offroad use) - Measurements: Extended - 21.687", Collapsed - 16.75"

- (25001-144): King 2.5 Rear Remote Reservoir Tundra Shocks without Compression Adjusters - (these were originally spec'd out as Tundra shocks but have been re-valved by Accutune Offroad for Tacoma's running no additional weight in the bed, again for daily driving and occasional offroad use. Lower bushings have also been replaced to fit within the Tacoma lower shock mount, grinding of the lower shock mount may be required to clear shock body under full compression) Reason for selecting Tundra shocks was for it's extended length capabilities over Tacoma spec'd shocks. - Measurements: Extended Length - 25.880", Compressed Length - 15.750”

 

How’s about a pic sittin on level ground

 

I can take one in about an hour or 2

 

After he’s done installing his TC lcas. lmfao

 

Lmfao!!

 

I’m way Jelly my friend.

 

Thanks dude! Better pics will happen for sure. Been busy with errands and shit but it’ll happen. Got like 4 different colors going on the front suspension, oh my OCD lol

 

Lol. Kings are they way I’m going as well in time. Looks sick as hell!!!!!

What is your tire size??

 

295/75R16(for the 3rd time)

Lol

 

Yeah I thought you had 95’s.

 

Do you rub? Did you do a cmc? Do you feel a powerloss?

 

Nope! Did the pinch weld mod. Had the CMC done the same time the tires were getting mounted, after that I had to trim the lower flares and liners, then finally the Fend-X liners arrived and not rubbing on those. No wheel spacers. I did have to trim the flares a bit more after switching to King’s though. Next alignment, I’m gonna go to a shop that can do 3° caster.

 

I did rub the OEM UCA’s while reversing at full lock on dips though. I had the tires mounted before going to full Icon’s then King’s. No rubbing at all on the Icon tubulars