South Carolina BS thread under new MANAGEMENT and lives in SC

Sounds like we need to plan another mod day meet. I know I have a couple of things I want to do and could use some help with.

 

Whatcha got?! I’m always down to come help out! The vertigo a been gone for about a week or so now so I’m game!

Plus if it’s someone else’s truck I won’t mod drunk! Mine I just cut the whole on the wrong side for the snorkel!!! I forgot I turned the truck around and just stayed on the same side.... oops!

 

With a camera install, that sounds about right.
I read as $500 labor alone, which is high for a preassembled kit, unless fabrication is involved.

Camera install involves installing & running the camera from the rear to front, either zip-tied to the undercarriage, then run into the cab or through the interior, which involved removing & reinstalling trim (or tucking the wires) to get the camera wires to the headunit.

An “easy” install, adapter kit, then attaching wires through connectors is a much simpler install & may still take a little while, with high “shop hours” & the install parts (adapter kit & connectors). Some shops include that expense into the headunit itself & say “free installation” ...

DIY is always much cheaper in headunit installs, which really aren’t hard- but can be time consuming running blutooth phone mic and/or camera wires where they are secure & well hidden.

 

I need proof of this...

 

The template should say this is the wrong side dumbass!

 

When did you do that.. and how am.i just now hearing of this??

 

Never and cause I’m full of shit? But it was a thought I had when I turned the truck around and pulled in going what if my drunk ass wasn’t paying attention! They need a warning on this template!!! Lol

 

Currently trying to figure out how to marry the snorkel with the afe intake or just go back to stock and sell the afe.

 

Welp, time for a new truck!

I still haven't wired the winch up, and I need to get the overload leaf added back in. I also need to put some blocks in the front. or something to get the front lifted back up.

 

The front sagging that bad? Can we adjust the coilovers?

 

I dunno the answer to that. The billies came set at 0, which I think is stock ride height, and the lift is achieved with the 886 coils. I think...

 

^^^ But yeah, stock Prerunners have the same nose height my truck does these days.

 

Sounds like you need to make an exhaust through it!
Or a “dual snorkel” ... hahahahaha

 

The old answer to that was that you couldn't lift the Billies on 886

 

I was about to say you seem to be handling that better than I would be

 

I'm not above buying new shocks if I have to.

 

If I did.... y’all wouldn’t know until you came over to the house and spotted the fucked fender 30 yards out in the woods buried 20ft down in shame!!!

 

Well I know you can put top plate spacers on one shocks but look and see about the billies..I just remember it was a no no but Marie at headstrong offroad would be able to answer that

 

I laughed too hard at this