MAX Modular Bed Racks by KB Voodoo - UPDATE WITH NEW GOODIES

How much would a 10” high in the 46” length with the tonneau cover brackets be with your guys military discount be?

 

PM’d

 

Does anyone know what length the stock carriage bolts are? I have a few that are getting some surface rust and I want to replace, just cause Im ocd

I forgot to measure if they were 1/4-20 x 1/2" or x 3/4" long though

 

I measured last night. For future reference, in case anyone needs to know, the stock bolts are 1/4-20 x 1/2"

 

They are actually 3/4" long carriage bolts, stainless steel.

If you measured 1/2", you might have one of our old racks.

 

Any chance you guys do law enforcement discounts as well?

 

But of course. Email us at support@kbvoodoo.com

 

Probably a dumb question, but figured I would ask while I'm at work without access to tape measure. I believe the Tepui mounting rails are 32" apart center-to-center. My question is how many holes showing should be on each side of the rack top bars to accommodate this? I am only asking as we are most likely bolting it straight through rather than using the metal brackets it came with for the tent.

 

I can take a picture of my setup during lunch if you'd like.

 

That would be awesome! Will only be a slight pain to get the bolts lined up and through the track, but we're most likely just leaving the tent on there.

 

Hopefully this is what you're looking for..

 

Ah, your rack has the tracks for adjusting the cross bars. Definitely helps to see the brackets underneath. We may just go that route, but our tent is the ruggedized version so it's got a bit of weight. Hoping the lady and I can manage to get it up and line it all up. Thank you!

 

did you ever get that tent mounted? I'm looking at doing the exact same setup (rack and free spirit RTT), but thinking of getting the aluminum 10" to save a little weight and prevent any rusting. Do you have any side profile shots of that RTT mounted on the rack, looking to see how much overhang and how tall it is.

 

@KB Voodoo Looking at getting a few things, but shipping to Canada is a killer. Any chance there is a code for this package?

- MAX Modular ALUMINUM TACO MAX 10" High Toyota Tacoma Bed Rack
Length: 46"
Upgrade to Tonneau Brackets ($125 option): No

- MAX Modular Outboard Bike Mounts Quantity:
For both sides of rack Add Rear Wheel Retention Strap: Yes

- MAX Traction Board Brackets, Pair

- MAX Modular Bed Rack Tonneau Brackets (Don't have a cover yet, but might as well have these if I do get one)

Thanks!

 

KB Voodoo isn't really on here anymore. They got a bad wrap on TW and got booted as a vendor. After reading through a bajillion threads I ended up getting just what you are looking at because it was the ideal setup for me with an OEM tonneau. I have been very pleased with my rack and would buy again. That has not been the case for everyone on here. There have been a bunch of powder coat and build quality issues but my rack is on point (and I am a bit OCD with that stuff). I love the bike racks and use them all the time.

 

The truck looks great, glad you like the rack.

I'm on here, but between skyrocketing sales, and moving into our new horse ranch, there's no time to hang out on internet forums.




After I wrap up operations in the shop for the day, I put on my Kubota hat and get to work. This place sat empty for about two years, so there's a lot to do. We've been chipping away at it all spring and summer so far.

By the way, any powder coat issues that we had are long behind us.

 

Good for you Chad, still rocking my Outboard Bike Mount. Bed caps still have all full powdercoating etc

 

what RTT is that, that takes up a lot of space? also is that a 10" with tonneau brackets?

 

Livin’ the dream!!

 

It is the 23 Zero Byron. It is a4 person so it hangs off a bit but works great for my family of 4.Yes the 10" with tonneau brackets.