Ontario BS Thread

Still wondering how that Nissan Titan dragged its full-size camper trailer down there last year.

 

Awesome Pete, Blue Mountain/Collingwood area?

 

Fantastic Pics Canadian Joe! Can't wait! @Krezz

 

yes it is heres some more with Trident167 and me

https://youtu.be/kT-OME7DWb4

 

@Thyces you were asking about the Icon Delta Joint earlier? This is how badly the joint housing holds up after just 6 months in our climate: https://www.tacomaworld.com/threads/icon-delta-joint-ucas.601051/

 

I was looking at those too, is that bad? They don't use salt out here in west btw

 

In an area that doesn't use salt

 

So using the amplified screwdriver method i found my lower idler pully is the culprit. Amazing how much louder the bad bearing is through the said method.

 

Got a present for y'all.

PDF'd the template, should be 1:1 to that of the template i made , so you can print this out in one go or do some arts and crafts with the kids.

Anyone with a 2nd gen wanna confirm the holes/ layout, i'd gladly like to hear feedback from it!

EDIT: PM me for the template!

 

wonder how it is to fix.

I know my cousin had a similar issue with his FJ and it was going to be upwards of $800.
Part alone was $450

 

It's only printing one half for me. Iv'e tried all the settings and nothing seems to work. The half it does print is very small. If I increase the scale then I only get the one page with a tiny corner. I'm blaming the PDF.

 

try to get a copy for me please Tony thanks

 

I think it's different for 3rd Gen

 

It's all in one. There are holes marked 2Gen and 3Gen.

 

I still need to cut mine out.

Need to get the clips though

 

you have a 3rd gen

 

more things are being rounded up for the TACO

 

he is so TuRd GeN that he doesn't know what he drives... typical overlander

 

thought so he's gonna use the template so can I

 

Just gave the PDF a print at home, i got the same 1 corner as you mentioned, but it does in fact print 1:1 on normal letter paper. Adobe acrobat has an option inside it that will allow you to print on multiple sheets, it's called "Poster"
https://helpx.adobe.com/acrobat/kb/print-posters-banners-acrobat-reader.html



("poster" print on left, original on right)

As @Tridet167 said, i tried to combine both the 2nd gen and 3rd gen layouts into a single template. as it stands, the 3rd gen holes worked for me well enough, but the 2nd gen holes are only approximate due to me tracing them on from the 2nd gen template that i was mailed.
the single template works with little issues on the 3rd gen, so i marked it up on the PDF to show my alterations for the 3rd gen

Also the clips i got from Part source