4 cyl with 35" tires

Im getting a Pro Comp 6" stage II lift and 4.88 gears put on my truck next week. Should I get 35" tires or 33" tires??? I'm concerned that the 4 banger may be too weak for 35's.

All comments would be appreciated!

edit: Actually I didnt go this route. I got a 3" OME with all sorts of goodies instead

 

i dont have any personal experience with your setup, but i just have a strong feeling your 2.7 will have a difficult time moving that much rubber.

 

35" are to big and 6in lift is to big for a 2.7l your truck will be really slow and have a hard time taking off.

 

4.88 gears will help immensely. I think It will turn fine. Will 5.26s fit?

 

x2 on gears helping perfectly

 

the gears you are useing will help a lot i think 35s will be fine i dont thint it will slow down all that much if you are using 4.88 gears

and post pics when the lift is done

 

ive seen people run 35s on stock gearing with the 2.7 and with 4.88 it should be pretty decent

 

With 4.88 I say 35's should be no problem. The % change in gear ratio is larger than the % change in tire diameter, so you're golden!

 

you'll be fine with those gears... altho i would personally go with 33's. 35's still rub on 6"s of lift.

 

alrighty so I think im goin with Toyo MT 35 x 11.5 (285/75/R18) tires. They're lighter than the 33 x 12.5" too so that should help some. The wheels are gonna 18" ATX mojave at 9.5" wide and 4.3" backspacing. Hopefully it will be done by the end of next week then I'll post the pics!

 

Are you regearing to 4.88's?

 

Stay out of the fast lane.

 

You should be fine if you regear.

 

yes i am regearing the front and rear with 4.88s

 

Pics when install is done please.

 

x2 i wanna see this

 

x3

 

x4

 

Go with the 35's, the are going to look mean on this thing. 4.88s are perfect. If you don't post pics of this beast I'll find you. JK...

 

hahahaha