Was My Shock Swap (Icon Stage 3 to Fox) Done Correct?

So I bought icon stage 3 with front coilovers and rear shocks with resi 3 inch lift and was on a trail in VA about 6 weeks ago and both rear shocks busted where the resi hose goes into the shock.

I took it back to 4 wheel parts and they did help with an exchange. I told them i wanted to swap to Fox and they recommended to go to Fox 2.5 with resi (fox

$1,594 880-06-418 Rear Coilover Shock Absorbers Fits Toyota Tacoma

880-06-418) for the front and they recommended Fox 2.0 with resi (fox

$282 985-24-117 Reservoir Shock CD Adjuster

985-24-117) for the rear. Should I have done 2.5 in front or back or will I be ok with 2.0 in rear?

Not sure what the big difference is between the two except for they said the 2.5 in rear would have a little more fluid in the resi but for the little off road I do it would be better than what I had with Icon.

Thoughts? Thanks in advance.

 

2.0 will be fine as long at the valving is set appropriately. (And I don’t see why they wouldn’t as I’m sure Fox uses the same data for both 2.0 and 2.5 setups). Both are better than Icon, so look at it that way.

 

Thank you for the feedback.