Alignment Shop

Got turned down by a local alignment shop because they said I have a leveling kit installed. Front is only raised 1.33 inches. Guy said their alignment machine is only programmed for stock height. Does this sound normal?

 

Idiots. You're better off going somewhere else anyway.

 

yeah, i wouldn't argue with that. move along.

 

They’re too lazy or don’t have the experience to align it. Like others have said, take it elsewhere.

 

They got scared because when you align it only gives you a certain amount of options for that vehicle and hunter doesnt mess with aftermarket ride height options. So basically they are lazy and stupid, A lot of people get firestones lifetime alignment for like 100$ and go back every few wheeling trips to get them checked. 0 toe, 0 camber and like 2.5 caster should be fine for you. Im at 4.5 caster but im at a full 3 inch lift in the front now

 

Most 4x4 shops know how to do it like 4wheelparts at:
https://www.4wheelparts.com/stores/find-a-store
I have the 5100s in front set at about 2" and they got it perfect first time. Rear has Dakars at 3" lift. Be aware Tacoma adjustment cams do get rusted/frozen and may need replacing but not in newer ones.