Power windows do not work after ECU-IG #2 fuse blown.

That's a good idea OP, but having someone to do so is the hard part. Perhaps a junk yard is another good option as well and le$$ money. Keep us posted and good luck!

 

Any "progress"?

 

Nope, haven't had the money, and understandably nobody has come forward to let me try there BCM in my truck lol

 

Bummer.
You still use the Tacoma, right? Nothing else is amiss?

 

Yeah, I still use it, my job is like 95% travel and everything has been fine so far, except the window won't go down.

 

Window or windows?

 

Windows

 

Temp working fix: remove yellow wire M6 connector. https://www.tacomaworld.com/threads/nitoris-oem-sr-foglight-mod.451495/
Read and follow the removal/separation of connector.
Wrap removed terminal with stripped small gauge wire. Cover with electric tape. Get add a fuse. Get a 2 amp fuse. Select your choice ACC fuse to tap. Other end of small gauge wire to add-a-fuse. Place in fuse panel.



ALL THIS DONE WITH NEGATIVE BATTERY TERMINAL REMOVED.
Replace battery terminal n verify function.

 

I appreciate the help and Info, but that's too much, I travel 90% of my week and don't have time to do this, I'd rather just replace the bad part and and get my truck back to working order.

 

May have missed this in the thread but my passenger window quit working and it took me severals days to figure out it was the lock window button on the armrest. Lame

 

OK...

 

Sorry, not trying to resurrect a dead threat, but I just got a new BCM and windows are working again!

Also popped open the old BCM just to look and I can't find one spot where it looks like it shorted or anything.

 

Any close up pics of the BCM opened?
How mulla did it set ya back?

 

I'll post pics in a bit, twas about $500.

 

But you did the remove n replace, right? NO paying the dealer for that..or...

 

Yeah, just bought the part. Tools like 2 min to swap. Easy peezy

 

Wondering if now I can fix it since my truck is good now and resell it.