What Have You Done To Your 3rd Gen Today?

I've been having a very hard time getting the autoanything page to work. I search a lot and it just crashes or spins and doesn't load. Anyone else have issues?

 

@eccracer104

 

Just tried it and I did not have any problems.

 

I used the adaptive cruise when behind big trucks, keeps me far enough they dont get mad, but close enough to draft. Also helps that I ask for permission with my CB before I tuck in behind.

 

Hm, that's weird. Maybe it's my work PC acting up. It was doing it yesterday too though.

 

Yeah-they were an hour drive from me, saved significantly on shipping. The company runs promos from time to time that helps with shipping. Memorial Day they had 15% off and $100 shipping credit.
But they’re are some good companies on your side of the country too.
They came powder coated.

 

Try doing a speed test.

https://www.speakeasy.net/speedtest/

 

I use these. They cost about $5 on Amazon.

 

New TacomaBeast decal for the rear window...

 

Cleaned out some Texas Mud after the drive to Florida. Must of been 100lbs of mud. Had to spray the underside all down. Bag was just from the skid plate, the other stuff from the K member.

 

All the dirty girls like to stay that way....just sayin'.....

 

I have the same sliders but it took me most of the day to install them - you must be young.. I did drill one hole in the frame, on the driver’s side, because it seemed to need more support there. The frame is very hard to drill through. All that said, I love these sliders and they have already saved me from damage a couple of times.

 

Got any pics?
I didn’t have to do any drilling and I used some air tools. I used the jack at one end lifted the rear up and installed that bolt loosely. Then installed the front while the jack held it up. Moved the jack to the rear to press the slider to the frame and installed that bolt. Made a pretty easy process.

Certainly not feeling young today though. After installing the sliders I went and played 18 holes of golf and am feeling it today.

 

Pops right up for me.

 

Shoot me a PM if there's something specific you're looking for. All looks to be good on my end here. Is it a work PC? Maybe our site is blocked? otherwise I'm not sure what's going on, but keep me in the loop, I'm kinda on the inside

 

Thanks for the tag!

 

Installed my RCI Bed Rack today. I added some clear gorilla tape between the rack feet and the bed cap protector to try to prevent a bunch of rubbing, but install only took about an hour

 

That looks good. Been debating getting a rack to mount over my tonneau cover

 

Sorry, forgot the pic.

 

Hey, 3rd Gen'rs. I ordered some of those Dominator rock sliders from Demello Offroad for the Tacoma back in May and it's going into the 12th week since that order. Has anyone else experienced this ordering straight from Demello? Is this normal lead time for them? I was quoted 6 to 10 weeks. I'm thinking of cancelling the order if they aren't ready by the end of this weekend.