Oahu deals and Craigslist finds

Scooped hood off a silver sport.
https://honolulu.craigslist.org/oah/pts/d/wahiawa-tacoma-3rd-gen-hood/6933364646.html

 

Seen that last week, very tempting but kinda just wanna swap hoods with the guy lol

 

$300 seems like a steal for a scooped hood. Then you can turn around and sell the non-scooped to a body shop for the same amount.

 

As long as the hood is damage-free like he says it is, then that's guaranteed agreeable

 

Yeah, who knows....only way to know is to go take a look at it. If its not “Cherry”, with no dents, scratches or rust like the ad states, then walk away. Not your fault if they didnt describe it accurately.

It will take some time but if it is as described, then its a smoking deal!

 

I have (5) five pcs FN Wheels Konig Countersteer Type X's for sale. Graphite Gunmetal finish, 16x8, -20mm offset (3.7" bs). This 16x8, 3.7" bs set was a special run of this size and color, according to FN Wheels, when I bought them.

4 good condition, 1 has pinstripes from offroading. (I did not try to buff the surface pinstripes off, perhaps they possibly could be corrected.)
IMHO, this is the perfect backspacing for running large tires or for that little wider flush stance.

Sold






Pics of the one that has the pinstripes, the rest are cherry:

 

Howsit braddah. Im stock height and dont immediately plan on running larger tires...except going wider and beefier looking. Would these be an ok option for stock diameter, but wider? Im interested if so

 

Deals!

 

Which model 3rd gen do you have? Which wheels/tires do you currently have?

 

ive got sr5 dcsb. stock sr5 wheels/tires currently. my office parking garage in kakaako is only 6'2" clearance so im screwed for now...

 

Yeah, definitely. They will be flush to your flares or a tad bit outside.

 

I fit into 6'2" garages with 37's.

 

wouldn't need recon for that ah? or not pass safety, right? what would recommended width be on these with stock diameter without rubbing? Sorry...im not a wheels guy at all

 

You might need flares depending on if the top of the tire tread protrudes pass your fender flares. But that would happen if you use wheel spacers also.

 

Is recon required for changing wheels?

 

if they protrude outside of your fenders, maybe?

 

I dont think you need for wheels only. I think the only time you need for wheels only is if the rim is 2" bigger than OEM, something like that...

 

Not needed for just wheels. I think they did away with the plus 2" rule as you could have 16" factory or 18" factory wheels for the same vehicle. So one guy could go to 20 and the other only 18 for the exact same vehicle.

Suspension modification or flares (Body modification) require recon.

 

Rajah...thank you

 

LOW MILEAGE, LIFTED, SUPERCHARGED TACOMA for sale!
I'm listing my 2015 Tacoma 4wd Off Road for sale as we're leaving the island. It'll be posted on Craigslist later tonight, but I wanted to first post here. Here are the details.

2015 Blue Ribbon Tacoma, double cab off-road, short bed, 4WD
Low mileage is 36,XXX miles. It is a daily driver, so it’s going up, but very slowly
TRD supercharge V6, auto transmission, tow package
Icon stage2 plus lift. Remote reservoirs front and rear. Fronts have CDC adjustments.
Cooper ST Maxx 255/80R17 tires (4) on 17” Method Race NV black wheels
ARE X series matching fiberglass cap with sliding vent windows, carpeted top and LED strip lighting
Rokblokz mud flaps for oversized tires
WeatherTech floor mats (front/rear) and window deflectors (front)
CalTrend neoprene seat covers (on since about two months old)
Dual battery (Grp 35) setup with Blue Sea isolator
Viper alarm/remote
Have the original suspension parts

The truck has RECON, recent safety check and registration through November. The truck has been awesome and is fun to drive. LOW mileage and Toyota reliability! Asking $30k. Shoot me a PM if you have questions or are interested. I’m cleaning her up and will get some pictures posted asap.