1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

96-04 Elite Off Road Plate bumper

Discussion in 'Elite Off-Road' started by Timicha, Jun 22, 2010.

Page 9 of 50
  1. Aug 25, 2010 at 6:32 PM
    #161
    Digiratus

    #161
    Digiratus Adventurer

    Joined:
    Mar 26, 2010
    Member:
    #34006
    Messages:
    23,827
    Gender:
    Male
    First Name:
    Mike
    Roaming the PNW
    Vehicle:
    The RedHead
    2002 XtraCab TRD 4x4 SCv6 AutoTrans With Lots of Mods ADS COs w/Compression Adjusters Camburg Uniball UCAs Whiteline Lower Control Arm Bushings Kartek 7" Limit Straps Plastics Guy Front Bumpstops Total Chaos Sprindle Gussets Custom Alcan Springs +800 lbs +3" ADS 10" Stroke Triple Bypass w/Resi Rear Shocks Custom Rear Shock Relocate All-Pro U-bolt Flip w/Timbren Bumpstops 4.88 Nitro Gears ARB Front Locker ARB Twin Compressor Black 17x8 Konig Countersteer Type X 285/70r17 Falken A/T3w Gunmetal 16x8 SCS Ray10s 255/85r16 Maxxis Bighorns Limited Edition (Relentless) Elite Front Bumper Smittybilt X2O 10K Winch Diode Dynamics SS3 Sport Selective Yellow Fog Lights in the Bumper Diode Dynamics SS3 Pro 4,000 Kelvin SAE Driving Lights with Clear Lenses on the Bumper Morimoto D2S Projectors XB35 Ballasts + 4300K Bulbs Badland Sliders FrankenFab Tire Carrier Swingout bumper w/kitchen BudBuilt Front & Bellypan Skids BAMF Rear Diff Skid Dometic CFX 55im Fridge/Freezer Alpha II Hardshell RTT Badland Custom Bed Rack Denso 210-0461 105 amp alternator Dual Northstar 24F AGM batteries BlueSea 7622 ML-ACR Battery controller Peak DBI Dual Battery Voltage Monitor Haltech IC-7 Display with Mako Dash Insert Haltech Elite 2500 Standalone ECU Magnuson MP62 Supercharger w/URD 2.2" Pulley Doug Thorley Headers Denso 650cc Fuel Injectors Aeromotive Stealth 340 Fuel Pump TransGo A340F Reprogramming Shift Kit OEM ECU Delete Full A340F Trans Control with the Haltech 2500 ECU 2.5" Magnaflow Hi-Flow CAT Magnaflow 18" Muffler w/Vibrant Resonator 13WL Brake Calipers with OEM Rotors & Pads Braided Steel Brake Lines Kenwood TM-71A Dual Band Ham Radio STI-CO Flex Whip VFH/UHF 1/4 Wave Antenna Midland MTX275 GMRS Radio w/Roof Mount Antenna Pioneer DEH-P9400BH HU Alpine Amps & Type R components (F) and coaxials (R) Wet Okole Seat Covers Weathertech Digital Liners Deck Plate Mod 1" Diff Drop Carrier Bearing Drop
    Hopefully you will get it soon man...like before Christmas would be sweet!!! :p
    I'm still waitin' too. And bein real patient about it. Just ask Tim, he'll tell ya how patient I'm bein. :rant::annoyed:

    j/k Tim......:D
     
    Digiratus, Aug 25, 2010
    #161
  2. Aug 25, 2010 at 9:38 PM
    #162
    Timicha

    #162
    Timicha [OP] Timicha

    Joined:
    Dec 23, 2008
    Member:
    #11854
    Messages:
    2,704
    Gender:
    Male
    First Name:
    TIM
    Tillamook / Portland , Oregon
    Vehicle:
    04 White Tacoma
    Fabtech 4 inch lift, tinted windows, diff drop, 33 inch MTZ tires on Raceline Raptor wheels, ELITE OFF-ROAD bumpers and sliders
    haha dont worry your's will be built right as i get back why'll i build atowns. be patient grasshopper :p
     
    Timicha, Aug 25, 2010
    #162
  3. Aug 25, 2010 at 9:39 PM
    #163
    Timicha

    #163
    Timicha [OP] Timicha

    Joined:
    Dec 23, 2008
    Member:
    #11854
    Messages:
    2,704
    Gender:
    Male
    First Name:
    TIM
    Tillamook / Portland , Oregon
    Vehicle:
    04 White Tacoma
    Fabtech 4 inch lift, tinted windows, diff drop, 33 inch MTZ tires on Raceline Raptor wheels, ELITE OFF-ROAD bumpers and sliders
    who wants that last spot???? guess no body likes the chance of a free bumper :confused:
     
    Timicha, Aug 25, 2010
    #163
  4. Aug 26, 2010 at 1:16 AM
    #164
    supremetaco2

    #164
    supremetaco2 Well-Known Member

    Joined:
    Jul 9, 2009
    Member:
    #19500
    Messages:
    1,105
    Gender:
    Male
    concrete jungle, oahu
    Vehicle:
    04inacoma
    +hp, lifted, lights, dif breather mod, debadged, shorty antenna...
    Very nice. CANT WAIT!
     
    supremetaco2, Aug 26, 2010
    #164
  5. Aug 26, 2010 at 10:16 AM
    #165
    1welder

    #165
    1welder Well-Known Member

    Joined:
    Jun 15, 2010
    Member:
    #38997
    Messages:
    64
    Gender:
    Male
    First Name:
    tony grace
    edgewood, tx.
    Vehicle:
    98' ext. cab
    toytec coilovers, bil 5100's, dakar leafs, e-locker rear,aussie front, 4x innovations sliders,cooper stt's 32x11.5x15, max 4 marathon seat covers,
    Yeah I got mine. Been workin on it for the last two nights. Got my winch on last night. Gonna work on blinkers and fog lights. I almost got it done. I'll get some pics up when I get it finished. I can only imagine how long it will take to Hawaii!
     
    1welder, Aug 26, 2010
    #165
  6. Aug 30, 2010 at 8:47 PM
    #166
    supremetaco2

    #166
    supremetaco2 Well-Known Member

    Joined:
    Jul 9, 2009
    Member:
    #19500
    Messages:
    1,105
    Gender:
    Male
    concrete jungle, oahu
    Vehicle:
    04inacoma
    +hp, lifted, lights, dif breather mod, debadged, shorty antenna...
    wher the pics at!? Ima pick up mien tomorrow! YEEEEEEEAH
     
    supremetaco2, Aug 30, 2010
    #166
  7. Aug 31, 2010 at 7:25 AM
    #167
    1welder

    #167
    1welder Well-Known Member

    Joined:
    Jun 15, 2010
    Member:
    #38997
    Messages:
    64
    Gender:
    Male
    First Name:
    tony grace
    edgewood, tx.
    Vehicle:
    98' ext. cab
    toytec coilovers, bil 5100's, dakar leafs, e-locker rear,aussie front, 4x innovations sliders,cooper stt's 32x11.5x15, max 4 marathon seat covers,
    I gotta put my fog lights in and I'll get some pics posted up.
     
    1welder, Aug 31, 2010
    #167
  8. Aug 31, 2010 at 5:11 PM
    #168
    supremetaco2

    #168
    supremetaco2 Well-Known Member

    Joined:
    Jul 9, 2009
    Member:
    #19500
    Messages:
    1,105
    Gender:
    Male
    concrete jungle, oahu
    Vehicle:
    04inacoma
    +hp, lifted, lights, dif breather mod, debadged, shorty antenna...
    man how many people did it take you to install that thing, its so freakn heavy! i got mine today, will take pics soon.
     
    supremetaco2, Aug 31, 2010
    #168
  9. Sep 1, 2010 at 1:17 PM
    #169
    Brutus

    #169
    Brutus Well-Known Member

    Joined:
    Mar 18, 2009
    Member:
    #14867
    Messages:
    241
    Gender:
    Male
    First Name:
    Butus
    Baltimore, MD
    Vehicle:
    2012 Crew Cab Sr5 TRD 4x4
    amazing, and pricing is lower then most ive seen for the plate style.... now for finding the $$$:confused:
     
    Brutus, Sep 1, 2010
    #169
  10. Sep 1, 2010 at 1:22 PM
    #170
    98SR5Red

    #170
    98SR5Red Well-Known Member

    Joined:
    May 31, 2010
    Member:
    #38110
    Messages:
    92
    Gender:
    Male
    First Name:
    Justin
    Maine/New Jersey
    Vehicle:
    98 SR5
    Sway-Away racerunners up front, Downey leafsprings (5 pack) and Bilstein 5125's in back, 2" body lift, K&N/AEM air intake, Energy Bushings, Nology plug wires, Custom front/rear bumpers and sliders. Downey header and custom exhuast from there back.
    Im sure this has been asked, but has it been figured how much more these weigh, compared to stock? Or a estimate on actual poundage? I like these a lot, just don't know if the 4 banger could handle the weight and tires.
     
    98SR5Red, Sep 1, 2010
    #170
  11. Sep 1, 2010 at 1:31 PM
    #171
    Chickenmunga

    #171
    Chickenmunga Nuggety

    Joined:
    Apr 10, 2008
    Member:
    #5877
    Messages:
    7,576
    Gender:
    Male
    First Name:
    Mike
    Keizer, Oregon
    Vehicle:
    08 TRD Offroad DC 4x4 with stuff
    All the normal TW BS
    If you really want to get technical, one guy can do it. It's just a pain, though. Two guys are plenty, Eric and I had the 2nd gen mounted in 1hr or less.



    Tim's got the 2.7L and drives on trails like he's robbing a bank.

    I need the free 1st gen first :rolleyes:
     
    Chickenmunga, Sep 1, 2010
    #171
  12. Sep 1, 2010 at 8:31 PM
    #172
    Timicha

    #172
    Timicha [OP] Timicha

    Joined:
    Dec 23, 2008
    Member:
    #11854
    Messages:
    2,704
    Gender:
    Male
    First Name:
    TIM
    Tillamook / Portland , Oregon
    Vehicle:
    04 White Tacoma
    Fabtech 4 inch lift, tinted windows, diff drop, 33 inch MTZ tires on Raceline Raptor wheels, ELITE OFF-ROAD bumpers and sliders
    they way right at 100lbs so i think you probably gain about 60lbs or so of weight after you take all the stock stuff off.

    haha i pull them on and off by my self usually but its easy to do with a second person. what i do when i'm by myself is put a jackstand infront of the truck and set it on that. I sent you a PM
     
    Timicha, Sep 1, 2010
    #172
  13. Sep 1, 2010 at 10:01 PM
    #173
    supremetaco2

    #173
    supremetaco2 Well-Known Member

    Joined:
    Jul 9, 2009
    Member:
    #19500
    Messages:
    1,105
    Gender:
    Male
    concrete jungle, oahu
    Vehicle:
    04inacoma
    +hp, lifted, lights, dif breather mod, debadged, shorty antenna...
    Does the bumper just slide in pretty much when i replace it? or will someone have to be holding the thing....? i hope 1welder took some pics :)
     
    supremetaco2, Sep 1, 2010
    #173
  14. Sep 1, 2010 at 11:12 PM
    #174
    Timicha

    #174
    Timicha [OP] Timicha

    Joined:
    Dec 23, 2008
    Member:
    #11854
    Messages:
    2,704
    Gender:
    Male
    First Name:
    TIM
    Tillamook / Portland , Oregon
    Vehicle:
    04 White Tacoma
    Fabtech 4 inch lift, tinted windows, diff drop, 33 inch MTZ tires on Raceline Raptor wheels, ELITE OFF-ROAD bumpers and sliders
    your gonna have to hold it up until you get a couple of bolts in.
     
    Timicha, Sep 1, 2010
    #174
  15. Sep 2, 2010 at 12:13 AM
    #175
    supremetaco2

    #175
    supremetaco2 Well-Known Member

    Joined:
    Jul 9, 2009
    Member:
    #19500
    Messages:
    1,105
    Gender:
    Male
    concrete jungle, oahu
    Vehicle:
    04inacoma
    +hp, lifted, lights, dif breather mod, debadged, shorty antenna...
    Be ready to be on the phone for hours..... haha nah nah well maybe....
     
    supremetaco2, Sep 2, 2010
    #175
  16. Sep 2, 2010 at 9:12 PM
    #176
    1welder

    #176
    1welder Well-Known Member

    Joined:
    Jun 15, 2010
    Member:
    #38997
    Messages:
    64
    Gender:
    Male
    First Name:
    tony grace
    edgewood, tx.
    Vehicle:
    98' ext. cab
    toytec coilovers, bil 5100's, dakar leafs, e-locker rear,aussie front, 4x innovations sliders,cooper stt's 32x11.5x15, max 4 marathon seat covers,
    man sorry i havent got some pics up, been busy as heck. i weighed everything i put on and everything i took off. you only take 21 pounds off your truck, or thats what my bumper weighed any way. the bumper weighed 93 pounds and my smittybuilt XRC8000 with the rope weighed 62 pounds. so i added 134 pounds to the front of my truck. truck never budged. still sits the same. handles a tad different. it will take at least two probably three people to put it on. i had to cut about almost 4" of my frame rails and the cross member that my skid plate bolts up to. rewired my side lights for blinkers and installed a set of lightforce lights. fog lights are still in the works. not sure what kind i want to get yet. let me try to post some pics. hopefully the size is right. if somebody can change the size feel free.
    truck with bumper.jpg
     
    1welder, Sep 2, 2010
    #176
  17. Sep 2, 2010 at 9:28 PM
    #177
    Digiratus

    #177
    Digiratus Adventurer

    Joined:
    Mar 26, 2010
    Member:
    #34006
    Messages:
    23,827
    Gender:
    Male
    First Name:
    Mike
    Roaming the PNW
    Vehicle:
    The RedHead
    2002 XtraCab TRD 4x4 SCv6 AutoTrans With Lots of Mods ADS COs w/Compression Adjusters Camburg Uniball UCAs Whiteline Lower Control Arm Bushings Kartek 7" Limit Straps Plastics Guy Front Bumpstops Total Chaos Sprindle Gussets Custom Alcan Springs +800 lbs +3" ADS 10" Stroke Triple Bypass w/Resi Rear Shocks Custom Rear Shock Relocate All-Pro U-bolt Flip w/Timbren Bumpstops 4.88 Nitro Gears ARB Front Locker ARB Twin Compressor Black 17x8 Konig Countersteer Type X 285/70r17 Falken A/T3w Gunmetal 16x8 SCS Ray10s 255/85r16 Maxxis Bighorns Limited Edition (Relentless) Elite Front Bumper Smittybilt X2O 10K Winch Diode Dynamics SS3 Sport Selective Yellow Fog Lights in the Bumper Diode Dynamics SS3 Pro 4,000 Kelvin SAE Driving Lights with Clear Lenses on the Bumper Morimoto D2S Projectors XB35 Ballasts + 4300K Bulbs Badland Sliders FrankenFab Tire Carrier Swingout bumper w/kitchen BudBuilt Front & Bellypan Skids BAMF Rear Diff Skid Dometic CFX 55im Fridge/Freezer Alpha II Hardshell RTT Badland Custom Bed Rack Denso 210-0461 105 amp alternator Dual Northstar 24F AGM batteries BlueSea 7622 ML-ACR Battery controller Peak DBI Dual Battery Voltage Monitor Haltech IC-7 Display with Mako Dash Insert Haltech Elite 2500 Standalone ECU Magnuson MP62 Supercharger w/URD 2.2" Pulley Doug Thorley Headers Denso 650cc Fuel Injectors Aeromotive Stealth 340 Fuel Pump TransGo A340F Reprogramming Shift Kit OEM ECU Delete Full A340F Trans Control with the Haltech 2500 ECU 2.5" Magnaflow Hi-Flow CAT Magnaflow 18" Muffler w/Vibrant Resonator 13WL Brake Calipers with OEM Rotors & Pads Braided Steel Brake Lines Kenwood TM-71A Dual Band Ham Radio STI-CO Flex Whip VFH/UHF 1/4 Wave Antenna Midland MTX275 GMRS Radio w/Roof Mount Antenna Pioneer DEH-P9400BH HU Alpine Amps & Type R components (F) and coaxials (R) Wet Okole Seat Covers Weathertech Digital Liners Deck Plate Mod 1" Diff Drop Carrier Bearing Drop
    Dude, looks awesome from what I can make out. That pic is tiny.

    The file size is too small to do anything with. I tried making it larger but it gets too pixelated to see any detail.
     
    Digiratus, Sep 2, 2010
    #177
  18. Sep 3, 2010 at 3:18 AM
    #178
    supremetaco2

    #178
    supremetaco2 Well-Known Member

    Joined:
    Jul 9, 2009
    Member:
    #19500
    Messages:
    1,105
    Gender:
    Male
    concrete jungle, oahu
    Vehicle:
    04inacoma
    +hp, lifted, lights, dif breather mod, debadged, shorty antenna...
    crap this involves cutting? is this just minor trimming???
     
    supremetaco2, Sep 3, 2010
    #178
  19. Sep 3, 2010 at 9:30 AM
    #179
    Timicha

    #179
    Timicha [OP] Timicha

    Joined:
    Dec 23, 2008
    Member:
    #11854
    Messages:
    2,704
    Gender:
    Male
    First Name:
    TIM
    Tillamook / Portland , Oregon
    Vehicle:
    04 White Tacoma
    Fabtech 4 inch lift, tinted windows, diff drop, 33 inch MTZ tires on Raceline Raptor wheels, ELITE OFF-ROAD bumpers and sliders
    it shouldn't involve any cutting, when i installed one on an 03 it went right on so you should be fine
     
    Timicha, Sep 3, 2010
    #179
  20. Sep 3, 2010 at 1:37 PM
    #180
    Digiratus

    #180
    Digiratus Adventurer

    Joined:
    Mar 26, 2010
    Member:
    #34006
    Messages:
    23,827
    Gender:
    Male
    First Name:
    Mike
    Roaming the PNW
    Vehicle:
    The RedHead
    2002 XtraCab TRD 4x4 SCv6 AutoTrans With Lots of Mods ADS COs w/Compression Adjusters Camburg Uniball UCAs Whiteline Lower Control Arm Bushings Kartek 7" Limit Straps Plastics Guy Front Bumpstops Total Chaos Sprindle Gussets Custom Alcan Springs +800 lbs +3" ADS 10" Stroke Triple Bypass w/Resi Rear Shocks Custom Rear Shock Relocate All-Pro U-bolt Flip w/Timbren Bumpstops 4.88 Nitro Gears ARB Front Locker ARB Twin Compressor Black 17x8 Konig Countersteer Type X 285/70r17 Falken A/T3w Gunmetal 16x8 SCS Ray10s 255/85r16 Maxxis Bighorns Limited Edition (Relentless) Elite Front Bumper Smittybilt X2O 10K Winch Diode Dynamics SS3 Sport Selective Yellow Fog Lights in the Bumper Diode Dynamics SS3 Pro 4,000 Kelvin SAE Driving Lights with Clear Lenses on the Bumper Morimoto D2S Projectors XB35 Ballasts + 4300K Bulbs Badland Sliders FrankenFab Tire Carrier Swingout bumper w/kitchen BudBuilt Front & Bellypan Skids BAMF Rear Diff Skid Dometic CFX 55im Fridge/Freezer Alpha II Hardshell RTT Badland Custom Bed Rack Denso 210-0461 105 amp alternator Dual Northstar 24F AGM batteries BlueSea 7622 ML-ACR Battery controller Peak DBI Dual Battery Voltage Monitor Haltech IC-7 Display with Mako Dash Insert Haltech Elite 2500 Standalone ECU Magnuson MP62 Supercharger w/URD 2.2" Pulley Doug Thorley Headers Denso 650cc Fuel Injectors Aeromotive Stealth 340 Fuel Pump TransGo A340F Reprogramming Shift Kit OEM ECU Delete Full A340F Trans Control with the Haltech 2500 ECU 2.5" Magnaflow Hi-Flow CAT Magnaflow 18" Muffler w/Vibrant Resonator 13WL Brake Calipers with OEM Rotors & Pads Braided Steel Brake Lines Kenwood TM-71A Dual Band Ham Radio STI-CO Flex Whip VFH/UHF 1/4 Wave Antenna Midland MTX275 GMRS Radio w/Roof Mount Antenna Pioneer DEH-P9400BH HU Alpine Amps & Type R components (F) and coaxials (R) Wet Okole Seat Covers Weathertech Digital Liners Deck Plate Mod 1" Diff Drop Carrier Bearing Drop
    The frame ends on the '98-'00 are different from the '01-'04.
     
    Digiratus, Sep 3, 2010
    #180
Page 9 of 50

Products Discussed in

Rugged Ridge | D-Ring Shackle Assembly, Receiver Mounted | 11234.01
$55.64
To Top