What rims should I look at?

Im trying to get some matte/satin black (to match the black flares on my O/R). I want them in 16in cus thats the tire size I have, and I would like for them to be as "light" as possible. Does anybody have any recommendations? I also want a little offset (thats what pushes the tires out a little right?).

 

You will be hard pressed to find lighter wheels than the SCS F5, which come in matte black, unless you are willing to spend money on forged wheels like Volks.

https://www.stealthcustomseries.com/products/f5

 

Method Race Wheels!

 

Sounds like F5s are up your alley. 4.5 BS no trim required and wheels are slightly pushed out, 3.5 BS you got that stance but you need a lift and some trimming.

Here’s 16x8 4.5 BS which weight 18lbs 13 oz. The 3.5 are a little lighter.

 

I like the look of Method NV or Double Standard. Bad Ass wheels too. Could not find Orange Taco Off Road with Method wheels. But I’m sure they are out there.

 

Scs f5’s Matte jet black

 

Check FN wheels. They are fairly light and have a few different styles too. I wanted to go to 17s so I went with the konig countersteer type x. But there are other options

 

Is that a badge that I am looking at?

 

Be one of the only few Elite RGV Tacoma owners with some SCS wheels. To do that, you’ll also need to get rid of those 265’s my guy.

Ray 10 and 285/75/16 is where the good stuff is at my guy

 

Yes left the ones are the doors to break up the profile a bit. No TRD sticker or nothing on the tailgate.

 

Always thought you debadged the whole thing. How you been my guy, haven’t talked to ya in a while

 

Fuel and Black Rhino make sick wheels

 

These are 17x8.5 they poke just a bit

 

Those don’t really check the box of being light as possible, but I agree black rhino makes some nice ones.

 

What size tire do you have there? Also did you need a spacer to fit the rim?

 

Does anyone run these other wheels in off road races? Are they just street wheels?

 

I guess Ill wait till my tires wear out.

 

I’m running 265/70/17 going with 285/70/17 after these go

 

Can you fit 285 under a stock 3rd gen?

 

Before I lifted, I mounted my 285s and rubbed everywhere. With trimming you might fix some of that. Also, wheels might make a difference in whether it rubs or not. Highly doubt 285s on stock truck would be doable though. I have heard some 3rd gens have been able to run a 255/85/16 (skinny 33s) on stock suspension.