What Have You Done To Your 2nd Gen Tacoma Today?

super easy. led size is here:

https://www.tacomaworld.com/threads/operation-hit-‘em-with-the-blue-lights.623282/

 

Looks great!

 

Looks good! I thought about doing the bulbs, but it's so clear on the knobs that I didn't like the random bright spots, if that makes sense. I found the tape helped to even the light out and keep it consistent all the way around.

 

Do you know if that changes from your 2011 to my 2015?

 

thread it on until the gasket (oiled) makes contact, and snug it down 1/4 turn. Never have a problem and I can sometimes remove them without the use of tools.

 

i don’t know but there are other differences, so i don’t know

 

in person, the light is consistent. in the photo it doesn’t look like it though.

 

Chase bar re-added and rewired. Swapped tents so I needed one of my friends to weld me up a new bracket.

 

Like I said I do the same

 

I'll look into it. Or just do the tape method

 

What bars is that really dig it

 

Still asking..........
Lmk

 

Rebuilt my oem axles with some new boots and grease .the old inner boots were cracking and just about to split. While I was in there I upgraded to the ECGS bushing and repacked both diff seals and synthetic fluid. Turned out pretty good.

 

With 143k and 12 years old I was surprised to see that my LBJ and tie rods were still pretty tight. Only thing that I noticed were my sway bar links boots were busted but still tight.

 

Tried this coil cleaner I had read about somewhere on here. Not expecting miracles or anything, just a shot.

 

The legs are adjustable so you can angle/tilt them.
It probably would pool the way I had it set up in the pic, but was just seeing how it all looked and went together.

Ideally you would tilt one side a little or both legs to drop the front an inch or so.

 

It doesn't designate which county or department it is representing so realistically I can do what I like as it's no different than adding say a sticker/decal or such.
They wouldn't let me do it if I was directly representing the Sheriff Office on the decal since it's not a department vehicle.

 

A grassy slope works , if there is a crash it's on the grass and not black top.

 

Added weathertech window vent visors to the truck.

 

nice. what lids and hood guard do you have?