ICON Billet Delta Joint UCA's

Anyone have these on their 2nd Gen Tacoma? Pics if you do of how they install, and experience with them?

 

They're a beefy and very stout UCA. I just pulled a set off a 3rd gen and have seriously considered swapping them onto mine for the helm adjustability.

 

Is it me or is the hole where the OEM Bolt goes through adjustable. You have any pics of them on

 

Yep, adjustable heim joints.

 

How do they adjust once they're installed? Doesn't the long UCA bolt have to be out for any adjustment? Always been curious about that.. I wonder if they're meant to be adjusted close on the bench and then get the rest of the angles at the LCA

 

Looking at the instructions, it looks like there's a threaded sleeve to allow adjustment without disassembly.


ICON billet upper control arms utilize heim joints at each pivot to allow alignment using the adjusters on the upper control arms as well as cam adjusters on the lower control arms. The heims can be extended or contracted by turning the collar. Make sure that the slit in the collar lines up with the slit in the housing and then tighten the pinch bolts in an oppossing pattern at least 3 times.

 

ICON Billet UCA's are adjustable while installed. No need to remove the UCA to make adjustment.

https://www.youtube.com/watch?v=Fgqn6Oatw_w

 

@Unchained 5150
Install is straight forward. I suggest having a friend help on your first install. It's hard to shot the UCA bolt into the hiem with only one person.