Ontario BS Thread

Lemme get this straight...guys that hate electronic transfer case actuators actually want automatic electronics lockers?

What happened to the 3 stick manual hubs crew?

I'm old. And mildly high...carry on

 

@Tridet167 @Joe23
How did you guys have your spare in the bed? Can they mount to the back cab on the 3rd rail, I dont think a 33 fits under the bed right

 

@EatSleepTacos put in a lunchbox locker and a couple other guys too

 

It fits with modification.

My spare is under the truck unless on trail.

Hammer the driver side centering part flat, hammer the passenger side about an inch back
Unbolt the tire winch, move as far back as you can.

When lifting up you'll have to pull it back so it doesn't contact the diff.

Otherwise yes I strap it to the 3rd rail that you can get.

 

I have it just laying there on a rubber mat and it doesn't slide around very much. Yeah 33's needs a little modification underneath.

 

They aren't auto electric.

They work with a clutch pack if I remember right

 

Auto anything...if ya can't say "no, don't do that" I'm not a fan

 

Good to know thanks guys ill be doing this forsure

 

I also had to chop my exhaust to fit my 33 under the truck

 

If you do what I described you don't need to. But it's tight

 

if anyone needs spare for a spare to hold your spare in case you don’t have a spare, I can spare my spare to you.

 

Ardbeg last weekend... I took this same picture 8 years ago:

had a cool fire. 2' log, split into quarters. hollowed and wired back together with a couple of air holes carved in... burned for hours! Now that I look at the picture, guess you can't really see the log very well.... Damn iPhone pictures.

 

one more:

 

Oh yes, and one can never have enough Yota trucks in the driveway!

 

I didnt think it would fit without cutting the exhaust. I tried a few times with the exhaust still there and could not get the tire to go up without touching it once it was tucked up and secure. I didnt want to risk melting my spare or some bs.

 

You need to move the tabs that locate it to the centre and pull it further back that's all.

 

Finally took the plunge on some sliders. My old step bars were bent to shit after 3 years of torture. After a lot of thought I went with CaliRaised. Got the 0 degree step since it's more practical as a daily vs. the 25 degree. I do like the look of 25 degrees better though but it didn't make sense.

 

ohhhhh I get it now.

derp.

My bad.

 

Nice!

Those look solid AF