Need help choosing a lift!

Very affordable for my trips

 

Of my 4runner?

 

A trd pro can fit 285's stock because of the wheel offset and they only ride 1" (Toyota's claim) higher than a non pro Tacoma. Of course if by 33's she means 285/75/16 tires

 

I like this. Kind of where I'm headed. I was thinking of adding the Sumo stops as well. I won't set mine as high as yours. Looks damn nice.

 

you shouldn't go cheap on 3" lifts you're going to ruin your truck. do you have a $5000 lying around?

if you don't, i say just spend about 1500 on beefier tires and wheels. there are plenty of ways to make your truck look mean without lifting it. taking off the air dam should be the first mod and best part is it's free.

 

stock

 

This is just a leveling kit

 

https://www.tacomaworld.com/threads/real-dirt-on-2016-trd-off-road-suspension-upgrades.548028/
https://www.tacomaworld.com/threads/sdhq-dclb-bolt-on-sliders.579532/

 

285s & 3” level

https://www.readylift.com/3-f-2-r-sst-lift-kit-toyota-tacoma-trd-sr5-rock-warrior-2005-2018.html

 

Or 32’s and 2” level

 

What leveling kit and what size? That’s a good stance and size.

 

this looks great! mind if i ask which 2" level?

 

I'd vote for this as a quality, but not too expensive lift option for about 2.5" lift. Had a similar setup on my 07. Have the next level Bilsteins on my 19. Keep in mind that 2-2.5" doesn't require needle bearings, differential drops, etc. When you get to 3" and up, that's when things get more complicated.

 

Thanks. It’s just these but I did the raw aluminum silver ones. Nothing else.

 

Check out toyotabumpstops.com

 

No rubbing or trimming?

 

Which leveling kit?

 

Any rubbing?

 

2 in front 1 in the back blocks came from old setup on my other tacoma

 

275x65x18 with 2in in the front and 1in in the back its within a 1/8 in all the way around