Sold- YES THEY ARE REALLY SOLD.. tires $100 for 4

17s, 17”x7.0”x4mm

 

255/80/17

 

I got to say 186 per tire is better, wow didn’t realize the prices would swing so much based on size.

 

I ran 265/75-16's on my un-lifted 2016 with no rubbing. I strongly suspect 275's will rub.

 

I have read on the Forum that guys have had good luck with the fitment with the 255/80-17's. I wouldn't bet money that they will not rub...

 

255/70 R18 with around 3 inches of lift

 

Back to the drawing board, but seriously thank you. With the 80 for aspect, that would actually make the truck taller correct? And I wouldn’t have to worry about any rubbing cause of the skinny factor? Am I actually understanding this shit?

 

No lift for me, yet. When it is time, it will only be a little, but with the goal of just making the truck handle better with weight that will get added.

 

Yes, by 1 inch. They may also rub on the uca with that pro wheel. You can't put a 285 on it as it's to wide for that wheel and you risk popping a bead when aired down.

 

I was reading a little bit of a bickering about that. So a 75 aspect be a better choice and not rub? As I am assuming it wouldn’t be a cheap adjustment to stop the uca rub.

 

Yes and no. I am lifted 3+ inches and I have JBA upper control arms. And on stock wheels I rub at full lock on the upper control arm. Other than that the tires don’t rob anywhere but they are very close to the mudflap when I am turning

 

So once I get new wheels with a better offset I should be good

 

Typically its using a wheel spacer to fix the rub... and most hate wheel spacers. So yes a 265, 70, 17 is the way to go without issues.

 

Yeah agreed. I HATE wheel spacers. So I’m just looking for the right wheel with a good negative offset to fix my problem.

 

0 off set and 4.5 on backspacing
Are what I have and I only rub with 285s.

 

I’m running 18s remember, so I have to deal with a different backspacing. Most 18s would be 9 inches wide. It throws everything off, but my mistake for not waiting

 

That's true. The Walker Evans (it's like -12 offset) seem to be a good wheel also the SCS wheel.

 

@NYCTaco52
If you want to know anything about wheels.... this OP is the one to ask.
https://www.tacomaworld.com/threads...lifted-info-inside-complete-with-poll.514755/

 

No bandaids, I’ll go as big as I can without issues on this set, and consider making the needed adjustments before the next set.. so this set gains a little tallness compared to the stock ones.


Now some one needs to buy these dam, I mean great 18 inch tires here so I get my commission..I mean so the buyer doesn’t have to go through this head ache of choosing, let the great deal do the choosing.