What have you done to your Tacoma today? 1st Gen Edition

Super Lube yeah that's it I believe

 

Just be careful with grease on the leaf springs, dirt will stick to it like crazy and make them 10x louder after your next trail. I think just hosing them off is a good idea, I would be hesitant to spray them with anything other than maybe a dry lubricant/PTFE spray

 

I think I have this at home -



https://blastercorp.com/product/dry-lube-with-teflon/

 

How obnoxious is that?? I bet its awsome.
Thanks!

 

If anyone is looking for a dash cam, the

$150 Rexing V1P 4K Car Dash Cam 2.4" LCD 2160p Front + 1080p Rear Wi-Fi 170° Wide Angle Dual Channel with Rear Cam, G-Sensor, WDR, Loop Recording Mobile App Supercapacitor

Rexing V1P is a great model with amazing HD resolution. The online compression tones it down a bit, but trust me - it looks great in person.

 

I ran the wires along the driver's side kick plates. I have a DC. Behind the rear seat there is a rubber grommet with a wiring harness already running through it. I ran the wires through there and along the top of the frame to the rear. I took the inside plate off the tailgate and mounted the camera through one of the 2 bolt holes that holds the handle to the tailgate. I had to modify the back of the handle and the tailgate with a dremel to get it to fit right. the back of the camera has a bolt sticking out the back. I installed a nut and it rebolted tailgate handle to it's original position. I hope that made sense.

 

I found a pic from the original install.
that is exactly what i did. the hole in the tailgate had to be elongated with a dremel in order to thread the camera into the handle. this style camera was the best i could find for my install location. the camera came with a nut and tightened the handle down great. im confident in the install. i drilled one hole in the side of the handle and threaded the camera in half way, then installed the handle and finished treading it in.

 

22271-62040?
https://www.toyotapartsdeal.com/oem/toyota~gasket~throttle~body~22271-62040.html

Id call your local parts dept and confirm fitment

 

They are mostly the same. Control arms are longer (I believe.) I’ll be able to look closer when I actually replace them on my tundra

 

Third gen thread is very serious thread it’s all business. ! No 3rd genners wanted to race small amount of fun was had. Two dudes called the truck ugly I made them these.

 

Wheels???

 

Started fabricating my PS cooler mount. It’s basically going to free float between these two rails via heavy duty zip ties.

 

I'd imagine it's been checked before but it would be a poor man's LT if it fit.

 

Go faster! Your core support isn't cracking yet!

 

I don’t think it would offer much more travel.

 

He's got to crack his frame crossmember, coil bucket, bed, and some other stuff first.

 

The billies and eibachs have def kept me from cracking shit too bad yet lol core support is cracked on the bottom left but that’s all
I can see right now. Hoping to do coil bucket gussets when I do finally get shocks on that I know will make me thrash the truck ha

 

ebay - shift extender. They make smaller extenders

 

I should probably give my buckets a good inspection. I'll be surprised if I don't find anything.

 

Is that a Jamaican bob sled?



















Feel the Rhythm! Feel the Rhyme! Get on up, it's bobsled time!