AZ BS Thread 4²0

I don't think so as the only one I ever sold was on the east coast. It was silver and dented.

 

New tire size or new rubbing problem?

New tire size
New rubbing problem, check your alignment.

 

I'm running out of boxes of parts in the garage. This thing is getting very, very close.

 

Hey guys, I have icon UCA and need to replace the bushings. Do I use oem bushings or do they have to be icon specific bushings? I'm thinking oem bushings but if not please let me know, thanks.

 

It’s after i had the LCAs replaced. The old ones were junk and allowed quite a bit of movement. But I did have some rubbing before. I don’t know if just pulling the flairs will help or if I need to trim the flairs too.

 

I did go camping last winter in Coconino NF up by Stoneman lake with some hardcore ex Marine friends. We scavenged up some fallen logs and brush and made some temporary shelters with a few tarps. Even with temps hovering around 20-25 degrees, we stayed plenty warm by sleeping by the fire. Probably some of the best sleep I’ve ever had. Thanks for the other suggestions as well!

 

Ok. I picked up an Indigo from someone out in Fountain Hills about 4 years ago. I wasn't a member on here at the time.

 

Nice hate to be so vague but there's just so many different spots. Most the time just driving to an area and scouting sites is half the fun.

 

New spare going on that's the highlight of my holiday weekend

 

I dont remember this being an option.

 

Someone sucks worse then me at Photoshop!

 

It's from Google Maps, I believe, and was just a conveniently timed transition.

 

Well I won't be able to fire it up this weekend like I wanted to because I decided to just drain the transmission while I was installing the boost tubes. So glad I did, the fluid was so burnt. I have the filter and gasket for the pan on the way. Just have a few little things to button up in the engine bay and it will be ready though!!

 

Just depends on the look you want. If you pull the flairs then you’ll have all the little holes in the metal fender, and likely rubbed paint marks where the flair outline used to be on the metal fender. Or you could just trim as necessary until they don’t rub.

 

When trimming, do dirt and crap collect in the new void and become troublesome? I think I would prefer to trim, but I've not seen it personally, only here on TW

 

Was it really a party or shit bags at your house

 

Happy that technology didn't exist when I was a kid.

 

Could always get a side job at UPS and get paid to do it.

 

I mean you will have dirt and what not get in there, but it won’t be any more troublesome than other spots on the truck. If you’re wheeling somewhere muddy you’ll have to spend an extra minute hosing it out