TRD Diff Lock Switch wiring

can someone tell me which wires do what? I am trying to install a set of switches that match but cannot get them to work right and the FSM wiring diagram isn't very useful.

 

Does the switch operating the same? As far as internally.

 

The black and red and red and black are the switch wires. The other 2 are illumination

 

I have no idea, here are the shitty instructions I got.

 

Black and red = ground? I got 12v when I turned on the parking lights for the black as ground and green wire as positive but it's not working. Diff lights don't flash when I push button either. So obviously I have shit ordered incorrectly

 

According to the manual those 2wires just make a connection when depressed.

 

But does that switch operate the same as the original Toyota one?

 

Are you hooking up lights or a locker?

 

According to your diagram the red & green wires would go to black/red and red /black. Doesn't matter which one.
And the blue and black would go to the other 2. Have to try both ways to see if switch lights up.
I'm assuming your truck came with an elocker?

 

Yes

 

Yes

 

Locker switch. Replacing the OEM switch with this one

 

Then this should work. ^^

 

Red and green on the new wires?

 

yes

 

.

 

This worked! Thanks a ton bro!

 

Before and after

 

probably going to wire up a master switch override for the two diff lock switches, do you know which one of these wires is the output wire for the diff lock?