DASAITA ANDROID 9.0 UNIT WITH APPLE CARPLAY WIRELESS AND OEM AUDIO PLUS

Does your steering wheel map come up?

 

Yes fwd/back, vol up/down work as well as phone controls on that side of the wheel

 

Fixed it! You have to go to factory settings then go to 126 then go to other and then go to steering wheel and go to map key

 

you mean the GPS in the dash? no. that was linked to entune radio. same with song info.

 

@DoubleD.17BlazingBlue
I can’t get the steering wheel controls to work, the back up camera or carplay with the dongle anyone know? As far as I know I have everything connected. Is there a separate connection for the back up camera?
Also what’s the password?



Edit: I got the back up camera to work

 

i believe the code is 126

 

Alright that worked. Which one did you guys choose? Thank you! now just need carplay to work

 

This is like the radio install from hell, the car play dongle is in the line with the purple usb connector, still no car play, and the fit is off i can't get it to sit in the dash right

 

Got a pic? You cut your bezel to fit it?

 

FYI the CarLinkIt dongle from Amazon posted in this thread works with iOS 13, just verified on my buddies phone who is running the GM of the beta.

 

Not yet it’s just hanging in there. Gotta cut the bracket to make it fit better Still no carplay going to finish it tonight after work. The radio seems to have a little more static now. Where did you attach your ground wire from the harness thinking that might be my problem.

 

I didn’t ground anything, just connected all plugs from harness and I’m using the oem radio antenna, don’t really listen to the radio but I did use it first day of install to make sure that app worked
You definitely have to modify the bracket to get it so sit far enough back and get the angle correct

 

I can’t get the damn Fitment right I’m about to throw this thing through a wall

 

I put the screws just tight enough to hold the unit and then popped on the bezel which can also be tricky, with the screws loosened the unit can move a little to heal it seat with the bezel. Then once you have the bezel on and it looks good and we’ll seated you can tighten the screws down all the way. Not sure if this helps but try it and make small adjustments

 

It seems like it’s not sitting high enough no matter what. I can’t get the bottom of the bezel snapped in

 

Move the bracket down on the unit so it sits higher, look at my side shot photo of when I have the bracket lined up on the unit

 

I put it in the same screws you did it just doesn’t seem right I took the brackets out and just put the radio in the hole with no brackets just to make sure it even fits. Gonna put the bracket in and see where the holes line up on it now

 

Anyone having issues using the factory GPS antenna? The head unit isn't getting any GPS signal. I installed the OP recommended adapter with no luck. I'm debating scrapping the OEM antenna and installing the one that came with the HU. Any suggestions?

 

Are you sure you used the GPS connector and not the XM? I accidentally used the XM one when i first installed it, they're similar

Mines in, I didn't screw in the bracket bc no matter where I put it it just wouldn't seat right with the bezel. I'll adjust it more when I have time. Right now the bracket Is in there so the radio can't move side to side but it's not screwed to the radio, just to the dash

 

Honestly @DoubleD.17BlazingBlue 's fitment picture saved my ass some heartache. Matched his pic with a few measurements of the Entune bracket.