1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

No Dashboard Illumination

Discussion in 'Colorado' started by old grouch, Sep 4, 2019.

  1. Sep 4, 2019 at 2:45 PM
    #1
    old grouch

    old grouch [OP] Well-Known Member

    Joined:
    Dec 14, 2014
    Member:
    #144242
    Messages:
    486
    Gender:
    Male
    First Name:
    Stan
    Colorado Springs, CO
    Vehicle:
    95 4x4 V6 Extra Cab
    E-Locker SS Skid 2" Lift
    I posted this on the 1st Gen forum but thought I might try somebody local. I have no lights on the dash, neither the cluster nor the heater/AC panel. All the warning lights work. The dimmer tests good. There is a short in the illumination circuit. (soon as the lights are turned on, the 10 amp fuse under the hood labeled "panel" blows) I can't tell from the wiring diagram in the FSM where the circuit plugs into the cluster. (which plug) Can someone get me pointed in the right direction. Electrical stuff is not in my skill set. Also am I going to have to remove the whole dash to chase this down? I'm in COS. Would be happy to pay for someone to help with this. Stan
     

Products Discussed in

To Top