What Have You Done To Your 3rd Gen Today?

Looks awesome man! I like your style

 

Morimoto xb fogs

 

Very nice. I would never try that by myself either. Would want someone with experience to take them apart. Looks sharp.

 

Those look grippy!

 

I like it. The little spot lights up front could be very beneficial. I might have asked before but what is your light bar in the grill? Been thinking hard about doing this, just don’t want to spend big bucks.

 

All mgm tacos are sexy AF. Just ask your girls. Lol.

 

Purple is in my blood. Gold is in the bank! Local college in Greenville is purple and gold also. Don't want to be confused with one of "those" fans.

 

At least the EPA won't have to get involved. Last i checked there was nothing wrong with making lemonade.

 

Yeah that’s what I’m thinking, they’d be the final piece of the puzzle.

 

Both but I was originally referring to the mileage.

 

I’m afraid I’m not 100% sure what you’re asking, so I’ll just answer a couple things. All my lighting stayed the same, I just blacked out the housing and the small grill over the turn signal bucket. And then I put 1 coat of nightshade on the back of the side reflector. If that doesn’t answer it let me know!

 

Took her to ikea (orlando)

 

Thanks for the response.
I’m curious how this looks when it is on. Does it still appear amber?

The side reflector. Sorry for the confusion.

 

Not quite hammer hangers,

But I rounded out the corners, and installed my new trailer hitch skid plate from WarFab @In4aride found here

 

Gotcha, so during the day it’s just black with a small amber light coming through, at night it’s brighter, but just the small section that’s cut out lights up amber, so still not much but definitely visible. Here’s a pic I just took to show it at night.

 

Thank you buddy. That looks way better than the stock amber reflector. Good job

 

3D printed some new center caps for my M/T Sidebiter IIs. I like how they look but they're probably gunna melt in this Phoenix heat.

Anyone know if I can fit 285/75r16 without rubbing on 5100s with 885 coils? I feel like I have too much empty space in there with my 265/75s.

 

285 will likely rub the fender liner and you will likely need a CMC (cab mount chop). Worth it though IMO. I also have 265/75r16 and they do look small.

The 3d printed caps look great, nice and tight fit!!

 

Picked up from Gunmetal Ray10s + Toyo MT 265/75/16

Stock suspension. Won’t do lift or 33s until regear. You could feel weight difference between these Toyos and my old KOs. 2.7 needs 4.88s to be happy with 33s.

 

this is all over the news here