What Have You Done To Your 3rd Gen Today?

Took her to ikea (orlando)

 

Thanks for the response.
I’m curious how this looks when it is on. Does it still appear amber?

The side reflector. Sorry for the confusion.

 

Not quite hammer hangers,

But I rounded out the corners, and installed my new trailer hitch skid plate from WarFab @In4aride found here

 

Gotcha, so during the day it’s just black with a small amber light coming through, at night it’s brighter, but just the small section that’s cut out lights up amber, so still not much but definitely visible. Here’s a pic I just took to show it at night.

 

Thank you buddy. That looks way better than the stock amber reflector. Good job

 

3D printed some new center caps for my M/T Sidebiter IIs. I like how they look but they're probably gunna melt in this Phoenix heat.

Anyone know if I can fit 285/75r16 without rubbing on 5100s with 885 coils? I feel like I have too much empty space in there with my 265/75s.

 

285 will likely rub the fender liner and you will likely need a CMC (cab mount chop). Worth it though IMO. I also have 265/75r16 and they do look small.

The 3d printed caps look great, nice and tight fit!!

 

Picked up from Gunmetal Ray10s + Toyo MT 265/75/16

Stock suspension. Won’t do lift or 33s until regear. You could feel weight difference between these Toyos and my old KOs. 2.7 needs 4.88s to be happy with 33s.

 

this is all over the news here

 

@CXYyuppie

It’s a $40 McTuning and I bolted it directly to the aluminum inner bumper. I used some plastic “washers” to raise it about and inch or so line up with the lower bumper. Also just basic toggle switches in the top of the cubby. Super budget build for the bar set up. Also kinda how I wanted to do it. See how good i could go at a lower end budget. Not something I’ll use more then once in a great while so...

 

Dude those look good!! Should seriously consider selling them.

 

You’re welcome! Yeah I’m loving the new look!

 

I'm not so lucky. Long family history. But I have everything under control.

 

Fluid filmed everything underneath and inside the frame. I live in upstate N.Y. so some protection from the snow and road salt is mandatory. We did four of my cars including the Taco, and three of his. I brought the 5 gallon bucket and type of sprayer they recommend that has a long nozzle. We only used a quarter of the bucket to do seven cars. I guess I have enough for three more years.

 

That's what my GF says!

 

Wrapped this up today after cleaning up some of the peeled black enamel, coating with hi-temp clear, and added the license plate frames for good measure. I certainly knew going into this that it wasn’t for everyone, but I wanted a way to have my own flavor to the otherwise clean SuperWhite w Black trim. Enjoy! (Or not )

 

Sequential ftw

 

It’s pretty cool, I like it.

 

Okay I gotta give it to ya. That’s pretty cool

 

Went for smoked winjets. Maybe the easiest mod yet. Gonna hope the sealant I used works as I like how these look a lot.