Colorado B.S. Thread

“Another one bites the dust”

 

That picture was taken a month ago.

 

I am! Just been too busy to lurk full time lol. I pop on to check for tags haha

 

Heading to Denver next week and looked on Turo to get a car, very surprised to see so many of you guys renting out your Tacos!!

 

Doubt it’s anybody in here. These fools care too much about their tacos.

 

Don't forget your a short drive to Marble/ Crystal Mill, no need to head up Schoefield Pass (Devil's punch bowl from Video), unless you want too. Great BBQ place in Marble too

 

Would have thought so too, but based on the couple I saw with lifts and ARB bumbers they seem to be at least enthusiasts. Maybe bought not built. Haha

 

I think most would allow you to date their daughters before they would ever willingly hand over keys to Rigs.

 

I just added an additional trans cooler to the factory setup. Never had any issues running two.

 

thanks. I decided to just add it in series as that is what the manufacturer says to do - add the additional cooler "after" the oem tow package cooler. I wanted to be sure what direction the flow was from on the tow package oem cooler for Gen 3. Looks like it flows into the oem tow package cooler is from the bottom connection tube. And the flow back to the trans through the top connection tube.

Nice thing too is you can use these same connection points to do a flush and fill. Initial 3qt drain from the pan then add 3 qts. back at fill plug - tighten fill plug. Use bottom connection to tow oem cooler to catch fluid being pumped out - fill equal amount through top connection back to trans.. Looks like little to no mess. Still have to use the SG2 to check temp for final pan amount.

If my assertion of flow into the oem tow package cooler is wrong please let me know. Thanks

 

I don't remember which hose was which but it doesn't really matter. Disconnect both of them and run the truck for a second set to catch fluid from both of them. You'll have your answer then

Connect a sprayer to the return line and you're in business.

 

Input is always the lowest line and return on top. It that way to avoid trapped air bubbles.

 

Starting weekend early with a little whiskey tasting

 

Looks like the whiskey tasting is already well under way....

Happy Friday everyone

EDIT: Aw he edited it before my quote posted.

 

I hope you gents have a good night. I have to put on a suit this evening if that tells you anything. I hope its not a big deal that it has grease stains all over it.

 

Happy Friday the 13th!

 

Haha, I looked back at it a few mins later at what I posted and was like "who the hell wrote that?"

 

@teamhypoxia come help me.

 

Want me to talk you through it?

 

definitely going to use the spray bottle trick. Got the Tru-Cool fab'd up for install - fits nice. Going to HomeDepot tomorrow to get some bolt etc then finish it up. Unfortunately my SG2 got mis-shipped so I will have to wait to do remainder. Screwed by ebay, again.