What Have You Done To Your 3rd Gen Today?

Today I blacked out the chrome parts of the rear bumper. No chrome left on the truck.
Used Avery wrap vinyl in satin black.

 

Nicely done! Very clean.

 

Picked up a new dash cam the other day! Hardwired it into the Yota ('19 CCSB Sport 6MT).
Looks slick but completely out of the way!

What do ya'll think?

 

I am looking for a 2nd Gen.

 

Received an offer I could not pass up.

 

Looks good..Care to share how you hardwired this? I'm thinking about doing this. Thx!

 

AUTO-VOX Dash Cam Hardwire Kit 12.74 ft 12-24V to 5V/2A with Battery Drain Protection System for X2/A1/D700/M8/M8/N2 Pro Car DVR/G1W GPS and All Other Mini USB Port Devices-Low Profile Mini

https://www.amazon.com/gp/product/B07FMJYX6S/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=UTF8&psc=1

I used this ^ and just replaced a fuse.
Used the washer fluid fuse and replaced it with this harness to make sure it would power on when the key was turned on.
Simply ran the wires up the A pillar behind the molding and carefully tucked the wires under the headliner.
Came out to be a really clean install and didn't hardly take any time at all.

 

Painted front calipers with the duplicolor kit. I'm just not sure about their stuff anymore. It turned out fine, just not as smooth as I hoped. Lot of work for an ok payoff.

 

I figured you would have painted them red to match your red accents.
Looks like a good job!
I did mine red about 3 years ago with a Krylon paint. Still holding up.

 

Been thinking of doing the same thing. I dont think its really going to be smooth like a Brembo or Stoptech. Unless someone figured it out? i mean i guess you can sand the surface down smooth? still looks good and clean.

 

Very nice. I looked at those but they were a little out of my price range. Might also want to post on the RTT thread. They would be interested

 

Finally!

Got my Meso puddle lights installed. It took about four and a half hours.

 

Nice, I have thinking of getting this or the Roofnest Falcon. How do you like it?

 

Wow! that is sweet! You SURE that you want to get rid of it? Too bad. Good luck. Looks great!

 

Welcome to T.W.

 

Thanks!

 

I’m a big proponent of safety. Working in EMS I’m around big vehicles all the time and almost all the rigs in my department use very bright LED tail lights.

So when I saw MESO Customs had his new LED total tail light kit I jumped on it.
Was totally siked when I was ACTUALLY ABLE TO BUY THEM without them being sold out the moment they went on sale.
Sure it’s $40 more than the OGs. But now my trucks brakes, turn signals, and reverse mimic those of fire trucks (sorta), I’m a happy camper.

 

Best use of OEM tires yet.

 

Good couple of weeks, maybe three for sure...

 

Where’s that rear bumper from? Looks real low profile.