Eibach pro lift kit

Correct. Holds the spring seat. It's a circlip. Download the kit instructions from our web site.

 

Love the new look.

 

Nice. Nothing added to the rear right other than the Eibach shocks? Also what tire size you got? How's your MPG with the Wildeaks? Thought jumping from OE tire size to just 265/75r16 wouldn't take a big hit but down almost 2 MPGs. It's like less than an inch difference.

 

I added 3 leaf progressive AAL from @Wheeler's Off-Road Inc. I removed the overload spring. Tires is 265/70/17. MPG is too early to tell. I just got them on, but I do see a slight dip so far on the dash read out.

 

Looks great. What are your impressions of the ride?

 

Looks super nice! Long awaited lol how you liking the ride? And what perch did you go with? Also I’m digging those side steps, where those from?

 

I got my alignment yesterday just to make sure. Side steps are GoRhino RB20s. The ride is stiffened up from the soft squishy stock ride. The side to side roll is gone. Handling feels like I have good control. However I have a slight clunk of some sort on the driver side front. I only heard it while on the down slope of a speed bump. After going over multiple speed bumps at slow(not crawl) speed I hear the same sound. Clunk or rubbing or something loose on the front driver side strut. Other than that I am satisfied with it. I will keep y’all posted as to what this sound is.

 

Sway bar rubbing your coils maybe?
Did you do a sway bar relocation?

 

Yes, I did the sway bar relocation bracket. No visible differences other than the logo on the spring. Driver side I can’t see, passenger side is facing out toward me.

 

Could it be the needle bearing? Have tried driving it in 4x4 to see if it goes away?

 

Ready for surgery and the morning after before heading out for wheels, tires, and alignment. I went with the Toytec AAL on the rear and the lowest spring perch on the front. I'm just a little over 2" on the rear and just under 2" on the front. I'm hoping the leafs settle in a little with some driving. The ride is great, I feel it's a little softer than stock.

 

Well my order at Autoaccessoriesgarage got pushed back again to the 9/27th... seems as if they have a middleman distributor between eibach and their shop. I feel like the dropped the ball on getting me among the first shipment. I'm a bit aggravated but if i ask for a refund and switch to another distributor i feel like i'm just delaying the inevitable... Anyone know of any places that have this suspension in stock... can't seem to get a guarantee of when i will expect anything to be shipped to me.

FYI, my order was originally placed in mid July if you want to sense my aggravation.

 

Good to hear, setup looks great

 

Do you think you could have reused the stock ubolts with the add a leaf? I’m about to install my lift and didn’t buy longer ubolts. I did get longer center pins. You’re trucks gonna look even better with bigger tires

 

Toytec has them in stock. Shock Warehouse can drop ship directly from us. Feel free to message me.

 

I added a 3 leaf aal, removed the overload and used the stock u bolts. The u bolts that came with my kit were loooong

 

Sent you a PM

 

I will be selling my full kit soon-ish...front and rear + OEM leafpack with 3-leaf AAL + ubolt flip kit.

 

I think you could get away with the stock ubolts with just the leaf. I added the shims and the half inch spacer on the left for the lean. I'm assuming the lean is worse on the rear of the long beds. The '17 I just traded need the spacer as well.

 

I'm good man, I'm taking a different approach for the rear. Just ordered a full kit from shockwarehouse... fingers crossed this one gets to me before the end of this month.