What Have You Done To Your 3rd Gen Today?

i made a mount out of 1'x1' aluminum square stacked on top of each other.
mounted those to a cross member just under the shroud, and attached the lights to them.
painted those black so you cant see em.

 

Build thread??

 

Finally got around to installing a dual USB power socket straight to the battery for always-on operation. While in there, I pulled out the lighter socket and wired in to the same source. Fused, of course.

USB socket from CH4X4 Yes, that's the Small size.



I have 3 items to plug in to run APRS or Wires-X while mobile...don't want to reset everything when I stop at the convenience store and such.



'Bout time I got around to doing this! Today is the 1yr anniversary of purchase!

Carry On!

 

Crazy good mod.

 

Yep! I don't know what I hate more...re-setting things after a stop for gas, or not being able to leave my phone in the truck to charge...problem solved for about $30

 

Mounted maxtrax to front bed panel. Not much but a start anyway. I had the maxtrax on my Jeep I traded in for the Tacoma so only cost was front rail and bolts.

 

Installed Cali Raised Fog lights today.

 

Good choice! In the spring and fall it gets foggy around here pretty often...mine have worked very well. Much better than the white stock fogs that just made a wall of white in front of you.

 

Do you have a link on how to dig in there? Get behind that panel?

 

I didn't take anything apart. The blank, and the lighter socket can be popped out using a small flat head screwdriver. The wire is routed through the firewall as usual, tie-wrapped up under the driver side, fished from the passenger side along the floor in front...there's a small space that goes all the way through...then I used a long tie-wrap, pushed through from the front (spare space in panel) and came out the right at the floor. Pulled the wire in from there. IF that makes any sense...

 

In one month I marry a girl 12 years younger than me. That's my retirement plan!

 

Finally got my Pro grille this weekend. Love the LED’s!

 

Switched out OME887 for Eibach Pro Kit up front with SPC ucas. Removed Stock pack with AAL for Dakar HD in the rear.
Need to get an alignment.

 

Lookin good chief!
Ignore the crass remark from the 2nd gen. Troll.

 

Really?
No class!

 

Finally installed my phone mount. Just need to run the charger cable behind the bezel.

 

Indeed!! Crass.

 

Has anyone ever installed a short throw kit for urd and if so have you did you have a problem where your camera and back up lights didnt not work. If you had these problems how did you fix it

 

Sounds good, but maybe YOU are HER retirement plan. JK. Good luck my man. Been married over 24 yrs. if it wasn’t for my wife, I would be broke.

 

Looks nice. Where is that?