Tacoma - OVTUNE - VFTUNER - Update Info and Original Development

Stock except for 265 65 17s

 

Anyone else notice how steady and smooth the power comes on all the way through the Rpm range? Seems like the abrupt vvt advance at 3,500 rpm is all but gone as mentioned here:
https://www.tacomaworld.com/threads...elopment-thread.495735/page-654#post-17453091

 

Hearing this makes me want to drain the 87 out of my tank and go refill with 91

 

What the proper method for clearing AT and LV values? (engine off etc, after 10 min trimming values then reset etc.)

Thanks

 

No, I think he’s talking about the current OLE being updated with OLE+1

 

It’s SOOOO smooth. There is still a noticeable transition, but subtle enough that a passenger might not notice it. Seriously, it’s really nice!

FWIW, I cleared all values with TS before loading.

 

So is 2.0 out for everyone ? I seem to only be able to download 1.5 and stock . I see 2.0.x.EROM but can't download it . any help would be great . TIA

 

https://www.ovtuned.com/pages/2-0-public

 

Downloading from flashmanager or from website?

 

Where is this mode 6? This is what I see? Sorry, I'm still trying to figure out the software.

 

what are you using to get this information?

 

for Android Phones ONLY - Wireless Bluetooth Diagnostic OBD2 Scanner Car Code Reader and Scan Tool for All 1996 & Newer Vehicles ELM327 Compatible OBDII

This wireless OBD2 reader and the Torque Pro app, on an Android tablet.

 

This the place. A1 is total count.
Do me a favor and run this in the morning after 3 min drive at low speed

 

You bet! So, after 3 minutes of low speed driving, start the software and then take a picture when I arrive at the destination?

 

Just note A1 value
PM me . Sensitive subjects

 

Well, tonight's 'stop 'n go' commute home was all I could stand on 04A61 2.0 Build 19770.
The 'tip in' didn't seem to decrease one bit, even with 100+ miles on the tune.

This evening, I flashed back to 04A61 2.0 Build 16012 Base and will await Build 19800, with its advertised milder 'tip in'.

Other than the aggressive 'tip in' Build 19770 was good and I like the Gear Lock feature.

Looking forward to the next revisions.

 

thank you . Now I don't see the tune for my 04B03 AT so looks like i'm out of the tune update

 

you need too update the ecu to 04b04 (via TSB/Dealer or local person with software) if you want early access to tunes. 04b04 is the base ECU Mat has on his R&D truck = first tune(s) to be released.

 

So my trucks been MIA for the last 8 months or so getting my long travel put in. Im currently on 1.04 running 35's and just got 5.29s installed today. Haven't been able to update to any of the newer tunes yet but will soon.

The truck doesn't seem to have any additional power with the new gears and just seems sluggish. 1st and 2nd pull decent but 3rd just kinda feels like it loses power. On the highway i feel like i really have to press the gas harder to get the truck going. I am taking it easy till I break it in of course. I know there aren't any 5.29 specific tunes yet but what should I do for the time being? Return to stock? Or update to a newer tune?

 

I just looked at the public page never saw it before but I'm left out of upgrading it looks like. I've emailed zen desk to ask if my truck will get a update .