Eibach pro lift kit

I’m in Fairbanks as well.

 

I know this is a 3rd gen thread, but is anyone running this kit on 2nd gen? I haven’t been able to find much information from the 2nd gen guys. I know one of the guys at Eibach has a 2nd gen, but he also runs armor. I’m wanting to keep my lift around 2” and wondering what these would give me on the lowest setting no armor.

 

2.5" on the lowest clip with the spring. If you run shock only on the second clip it's about 1.7 and still rides well.

 

They fit great! We use them all day long with assemblies here.

 

What do you guys recommend for a rear lift w/ this kit for my needs? No towing, rarely a load in the bed, and want to retain factory rake. Front would be set on the lowest setting. Thank you!

 

If wanting the stock rake or close to, go with our 1.5" multi add a leaf for the best ride. An 1.5" single add a leaf would do the trick but will be slightly firmer. There is also the 2" single add a leaf if really wanting that stock rake appearance.

 

Great, thanks. I see there is multi add a leaf and then the single add a leaf. I guess I was am not sure what pros-cons are of either one. If the multi leaf will give me a better ride and still retain some rake I will go that route. Thanks for your advice, will be in contact.

 

Keeping your factory overload in with the multi-add a leaf will get you 1.75" of lift. Which will be better to get you that factory rake look.

 

I’m in fairbanks too. If you ever need anything Toyota. give green tree in anchorage a call. I got my cvt tent through them.

 

Alaska! Dang...

 

I’ve been riding 2.5 for about a year but with bumper and winch it’s dropped some. I’m unfamiliar with the process...how do I move the ring to the top slot (3 inch slot) I know it’ll make the ride a bit tougher but I’d like to at least try it and see how it sits...or should I just get the @HeadStrong Off-Road 1/4 spacers and get that 1/2 inch lift that way?

 

Install wise the 1/4 spacer would be easier, as you don't need to remove the top mount.

Other wise remove top mount, slide spring off, slide spring seat off, move clip up one grove and re-assemble. Not to bad.

 

Would a spacer that small negatively effect the coilover over time? Or cause any issues.

 

The quarter inch spacer is commonly used to correct the Taco lean. I believe your ride would be better with the spacers but probably negligible in the end.

 

Negligible as in not worth it or as in it really doesn’t matter which route. Bc it it doesn’t really matter ridewise I’ll go the easier route to get the extra .5 inch lift in the front

 

Just a little info:
Just ordered the kit and got the $200 off. Went into chat and asked for a discount. 9WW200. I don’t know if it will work more than once? Too good of a deal to pass up!

 

Thanks for posting this! I just used that code and also got the $200 off. I had almost given up on wheelwell codes after trying the last several week and continuing to get declined for this kit. $395 to my door is too good of a deal to pass up.

Now I just have to decide what I want to do to lift the rear.

 

Talk to Marie at @HeadStrong Off-Road and get their progressive AAL under $200 and a solid lift

 

Shout out to @Ryan at Eibach for helping me out where the other vendor i was using before was just completely slacking... now i got my Kit on it's way... glad to finally have a delivery date!

 

Thanks for the code $200off. Ordered.