Aftermarket seats? Any luck?

Nice. I have a Rockville 10" powered sub I'd like to mount to the back wall. It seems like there is not very many consistently flat areas on the back wall of a single cab. I just have it under the passenger seat now.

 

If you want some real bass do away with those and get a large kicker box, nothing can compare to a kicker type box and the price will be the same. I had that setup original and was ok, but an Amp and kicker box is the way to go like what I have. HUG DIFFERENCE if you decide, but make sure it will fit. You can buy just the box and try first to see how it fits.
I had 4 runner seats in before and the box did fit,

 

I’m not really a huge bass guy anymore. I just want balanced sounding music. Nothing too extreme

 

Cool then what you have will work perfectly

 

This is all the room I got to work with, kind of sacrificed the room I have with a regular can for the sake of bass. @1997tacomav6

 

I like it,

 

New seats to come, I hate the bench. Got a lot of upgrades to the interior to come. Its all about the little things. Do you know if a center console like yours is applicable to my regular cab?

 

I’m sure it is available as we both have single cabs, just hunt one down here or at a yard

 

Yeah I just found one on partsgeek.com for $40. How hard was it for you to install your corbeau seats man?

 

As easy as pie, took 30 minutes, I needed to bend the seat belts brackets a bit if I remember.

 

Forsure man im going to invest in some comfortable chairs soon i didnt know they made the regular cabs with v6, was it a swap?

 

I would find a shop that carries these chairs so you can go try them out to decide what model u like.
The LG1 chair is NOT A suspension seat so it rides a little rougher, but it a thinner chair and you gain more room in the truck from leg room to head room by 2 inches. The only down fall on these chairs is the drivers side bolster is very tall and the foam will collapse over time because you climb over it with
all your weight each time you get in and out, but the return is far better then that issue.

Yes they made the reg cab with a 3,4 v6 in 1995.5-1997 in the 4x4 verson. In 1997 they upgraded the ECU and that’s when the TRD supercharger was made, so the trd supercharger was only
available for the reg cab for that year in 1997 only,
1998 forward the v6 was not available anymore in the reg cab. The ECU does not work with the supercharger for the 1995.5-1996 v6 years. So there are very few v6 3.4 trucks with a trd supercharger in the reg cab design that are original.
Yes you can do a v6 swap but it’s a ton of work to do and if you want to add the supercharger you have to swap out the ECU and wiring harness for the 1997 type forward.

 

Damn man talk about the best options to have, thats a rare truck then! I though my stepside was a rare option lol. And yeah later I could see myself swapping out the the 2.7 incline 4 for a ls1, but it will mean beefing up a lot of the drivetrain. The stock 3rz is so dependable so I love it for now. How much boost does the trd deliver stock?

 

10 pounds of boost with a few mods,so about 300 horses 320 torque give or take and as dependable as you could ever want.
I drive about 30-35k a year,
My truck is NO garage queen!!

 

You can always turbo the 4 banger and get lots of power like boostedka has done or get a supercharger for the 4 banger too.
He has a nice build thread below
https://www.tacomaworld.com/threads/boostedkas-turbo-3rz-tacoma.435280/

 

Hell yeah man ! I put 20,000 on mine, but I've looked around and cant find a supercharger for the 2.7L I4 3rz-fe.

 

Did the back of your cab come carpeted like that? If not where did you get the material for it or if you have any ideas for mine cause it’s all bare

 

Yes the SX model had carpet on the back wall, maybe the dealer has this part

 

Just going to make it then

 

Just ordered some new seats! Any additional hardware needed for the install of the GTS II seats and brackets?