1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: ICON install question - yes I searched.. First Time Tacoma Owner Suspension Upgrade New leaf springs Dealer lift kit installed? Ome Rear leaf spring Questions? (Please) Ome progressive (7) leaf pack from dsm

Can someone verify this assembly?

Discussion in 'Suspension' started by LonghornTaco, Oct 22, 2008.

Page 1 of 2
  1. Oct 22, 2008 at 7:18 PM
    #1
    LonghornTaco

    #1
    LonghornTaco [OP] Can you pass the bailout please?

    Joined:
    Oct 6, 2008
    Member:
    #9763
    Messages:
    3,318
    Gender:
    Male
    First Name:
    Jason
    Minnesota
    Vehicle:
    Black 09 4x4 TRD Off Road Doublecab
    3" ToyTec coilover lift on Bilstein 5100s, Total Chaos UCAs, ToyTec diff drop, Scangauge II, 4D MagLite mounted on the drivers seat, Painted engine cover, Painted calipers (red), Painted skid plate (red) Valentine 1 radar detector hard wired, Damplifier Pro on the floor, back wall and doors, Luxury Liner Pro on the floor and doors, Kenwood DNX8120, 2 Pioneer TS-SW1041D 10" shallow mount subs, 2 Pioneer PRS-D4200F 1200W amps, Mr Marv sub enclosure, Hybrid Audio Clarus 6.5" components in the front doors, Alpine 5.25" coaxials in the rear doors, A.R.E. LSII fiberglass tonneau cover, All Pro bumper, All Pro sliders, Wet Okole seat covers, Sockmonkey Mountain badges, PIAA 510 SMR Driving Lights, Warn M8000 Winch, Bud Built skids
    I am about to compress my coils and mount the strut, but I have a couple of questions...

    1. Does this look right?

    Inner bushings
    [​IMG]

    Top plate with bushings
    [​IMG]

    Instructions
    [​IMG]

    If you notice in the instructions, there is another piece (indicated with the arrow) that I don't seem to have. I have two "kits", including the top plate and bushings for each side, and all of the nuts, bushings, etc... are in sealed bags. Neither kit had that piece. Also, that little silver sleeve (furthest to the left in the top picture) will probably fit, but it's gonna be tight and probably won't come off. That's why I wanted to verify this stuff before assembling the whole thing only to find it's wrong.

    2. Everyone here says that "stacking lifts" is bad. However, the instructions for the adjustable coilover state that I should set the 5100 to the .85" setting, unless I want less than 2" of lift, then set it to stock ride.

    Help! :eek:
     
    LonghornTaco, Oct 22, 2008
    #1
  2. Oct 22, 2008 at 7:21 PM
    #2
    chris4x4

    #2
    chris4x4 With sufficient thrust, pigs fly just fine. Moderator

    Joined:
    May 8, 2008
    Member:
    #6497
    Messages:
    112,751,526
    Gender:
    Male
    First Name:
    FlimFlubberJAM
    Tenoe, AZ
    Vehicle:
    2019 Rubicon 4 Door,
    4.10 gears, sliders, and lots of buttons.
    Looks to be right. Your running a different top plate. As long as you have a bushing and backing plate under it, thats how it should be. :)
     
    chris4x4, Oct 22, 2008
    #2
  3. Oct 22, 2008 at 7:24 PM
    #3
    Ridingontrd

    #3
    Ridingontrd Well-Known Member

    Joined:
    May 7, 2008
    Member:
    #6459
    Messages:
    7,945
    Gender:
    Male
    First Name:
    Richard
    Laughlin,N.V
    Vehicle:
    trd sport 4x4 w/towpkg
    aFe prodry,Dynomax ultra flo ss,Scangauge2,Demello front bumper,BudBuilt skids,sliders(local)AllPro rear bumper,Wet O's cobalt blu,w/halfpiping,TRD logo in gold,R/L hood struts,5150's@10"aal 3 pack,T/C uca,Light racing c/o,1"diff.drop,de-badged,
    The red arrow part...look at your dust boot on the shock.:)
     
    Ridingontrd, Oct 22, 2008
    #3
  4. Oct 22, 2008 at 7:24 PM
    #4
    LonghornTaco

    #4
    LonghornTaco [OP] Can you pass the bailout please?

    Joined:
    Oct 6, 2008
    Member:
    #9763
    Messages:
    3,318
    Gender:
    Male
    First Name:
    Jason
    Minnesota
    Vehicle:
    Black 09 4x4 TRD Off Road Doublecab
    3" ToyTec coilover lift on Bilstein 5100s, Total Chaos UCAs, ToyTec diff drop, Scangauge II, 4D MagLite mounted on the drivers seat, Painted engine cover, Painted calipers (red), Painted skid plate (red) Valentine 1 radar detector hard wired, Damplifier Pro on the floor, back wall and doors, Luxury Liner Pro on the floor and doors, Kenwood DNX8120, 2 Pioneer TS-SW1041D 10" shallow mount subs, 2 Pioneer PRS-D4200F 1200W amps, Mr Marv sub enclosure, Hybrid Audio Clarus 6.5" components in the front doors, Alpine 5.25" coaxials in the rear doors, A.R.E. LSII fiberglass tonneau cover, All Pro bumper, All Pro sliders, Wet Okole seat covers, Sockmonkey Mountain badges, PIAA 510 SMR Driving Lights, Warn M8000 Winch, Bud Built skids
    Thanks Chris!
     
    LonghornTaco, Oct 22, 2008
    #4
  5. Oct 22, 2008 at 7:26 PM
    #5
    chris4x4

    #5
    chris4x4 With sufficient thrust, pigs fly just fine. Moderator

    Joined:
    May 8, 2008
    Member:
    #6497
    Messages:
    112,751,526
    Gender:
    Male
    First Name:
    FlimFlubberJAM
    Tenoe, AZ
    Vehicle:
    2019 Rubicon 4 Door,
    4.10 gears, sliders, and lots of buttons.
    LOL, I thought he was talking about the bushing and the backing plate. :eek:
     
    chris4x4, Oct 22, 2008
    #5
  6. Oct 22, 2008 at 7:27 PM
    #6
    LonghornTaco

    #6
    LonghornTaco [OP] Can you pass the bailout please?

    Joined:
    Oct 6, 2008
    Member:
    #9763
    Messages:
    3,318
    Gender:
    Male
    First Name:
    Jason
    Minnesota
    Vehicle:
    Black 09 4x4 TRD Off Road Doublecab
    3" ToyTec coilover lift on Bilstein 5100s, Total Chaos UCAs, ToyTec diff drop, Scangauge II, 4D MagLite mounted on the drivers seat, Painted engine cover, Painted calipers (red), Painted skid plate (red) Valentine 1 radar detector hard wired, Damplifier Pro on the floor, back wall and doors, Luxury Liner Pro on the floor and doors, Kenwood DNX8120, 2 Pioneer TS-SW1041D 10" shallow mount subs, 2 Pioneer PRS-D4200F 1200W amps, Mr Marv sub enclosure, Hybrid Audio Clarus 6.5" components in the front doors, Alpine 5.25" coaxials in the rear doors, A.R.E. LSII fiberglass tonneau cover, All Pro bumper, All Pro sliders, Wet Okole seat covers, Sockmonkey Mountain badges, PIAA 510 SMR Driving Lights, Warn M8000 Winch, Bud Built skids
    I thought about that and took a look, but when I put that dust boot on, there isn't enough room left on the shaft to start threading the top bolt...
     
    LonghornTaco, Oct 22, 2008
    #6
  7. Oct 22, 2008 at 7:29 PM
    #7
    chris4x4

    #7
    chris4x4 With sufficient thrust, pigs fly just fine. Moderator

    Joined:
    May 8, 2008
    Member:
    #6497
    Messages:
    112,751,526
    Gender:
    Male
    First Name:
    FlimFlubberJAM
    Tenoe, AZ
    Vehicle:
    2019 Rubicon 4 Door,
    4.10 gears, sliders, and lots of buttons.
    You'll be fine leaveing them off
     
    chris4x4, Oct 22, 2008
    #7
  8. Oct 22, 2008 at 7:35 PM
    #8
    Ridingontrd

    #8
    Ridingontrd Well-Known Member

    Joined:
    May 7, 2008
    Member:
    #6459
    Messages:
    7,945
    Gender:
    Male
    First Name:
    Richard
    Laughlin,N.V
    Vehicle:
    trd sport 4x4 w/towpkg
    aFe prodry,Dynomax ultra flo ss,Scangauge2,Demello front bumper,BudBuilt skids,sliders(local)AllPro rear bumper,Wet O's cobalt blu,w/halfpiping,TRD logo in gold,R/L hood struts,5150's@10"aal 3 pack,T/C uca,Light racing c/o,1"diff.drop,de-badged,
    I don't remember if that part is also on the front.I am sure it's on the rear shock.That piece is supposed to be half way in the boot.
     
    Ridingontrd, Oct 22, 2008
    #8
  9. Oct 22, 2008 at 7:38 PM
    #9
    chris4x4

    #9
    chris4x4 With sufficient thrust, pigs fly just fine. Moderator

    Joined:
    May 8, 2008
    Member:
    #6497
    Messages:
    112,751,526
    Gender:
    Male
    First Name:
    FlimFlubberJAM
    Tenoe, AZ
    Vehicle:
    2019 Rubicon 4 Door,
    4.10 gears, sliders, and lots of buttons.
    My rears have it, But I dont think I have ever seen it on the front. Generally, the front shocks dont have a rubber boot, as it can flex into the spring. They usually use a plastic "Dust cover" to protect from debrise.
     
    chris4x4, Oct 22, 2008
    #9
  10. Oct 22, 2008 at 7:39 PM
    #10
    Ridingontrd

    #10
    Ridingontrd Well-Known Member

    Joined:
    May 7, 2008
    Member:
    #6459
    Messages:
    7,945
    Gender:
    Male
    First Name:
    Richard
    Laughlin,N.V
    Vehicle:
    trd sport 4x4 w/towpkg
    aFe prodry,Dynomax ultra flo ss,Scangauge2,Demello front bumper,BudBuilt skids,sliders(local)AllPro rear bumper,Wet O's cobalt blu,w/halfpiping,TRD logo in gold,R/L hood struts,5150's@10"aal 3 pack,T/C uca,Light racing c/o,1"diff.drop,de-badged,
    Correct, The front has a cap,dust cover.
     
    Ridingontrd, Oct 22, 2008
    #10
  11. Oct 22, 2008 at 7:40 PM
    #11
    LonghornTaco

    #11
    LonghornTaco [OP] Can you pass the bailout please?

    Joined:
    Oct 6, 2008
    Member:
    #9763
    Messages:
    3,318
    Gender:
    Male
    First Name:
    Jason
    Minnesota
    Vehicle:
    Black 09 4x4 TRD Off Road Doublecab
    3" ToyTec coilover lift on Bilstein 5100s, Total Chaos UCAs, ToyTec diff drop, Scangauge II, 4D MagLite mounted on the drivers seat, Painted engine cover, Painted calipers (red), Painted skid plate (red) Valentine 1 radar detector hard wired, Damplifier Pro on the floor, back wall and doors, Luxury Liner Pro on the floor and doors, Kenwood DNX8120, 2 Pioneer TS-SW1041D 10" shallow mount subs, 2 Pioneer PRS-D4200F 1200W amps, Mr Marv sub enclosure, Hybrid Audio Clarus 6.5" components in the front doors, Alpine 5.25" coaxials in the rear doors, A.R.E. LSII fiberglass tonneau cover, All Pro bumper, All Pro sliders, Wet Okole seat covers, Sockmonkey Mountain badges, PIAA 510 SMR Driving Lights, Warn M8000 Winch, Bud Built skids
    what about the strut height setting?
     
    LonghornTaco, Oct 22, 2008
    #11
  12. Oct 22, 2008 at 7:41 PM
    #12
    chris4x4

    #12
    chris4x4 With sufficient thrust, pigs fly just fine. Moderator

    Joined:
    May 8, 2008
    Member:
    #6497
    Messages:
    112,751,526
    Gender:
    Male
    First Name:
    FlimFlubberJAM
    Tenoe, AZ
    Vehicle:
    2019 Rubicon 4 Door,
    4.10 gears, sliders, and lots of buttons.
    How high are you looking to go?
     
    chris4x4, Oct 22, 2008
    #12
  13. Oct 22, 2008 at 7:43 PM
    #13
    Ridingontrd

    #13
    Ridingontrd Well-Known Member

    Joined:
    May 7, 2008
    Member:
    #6459
    Messages:
    7,945
    Gender:
    Male
    First Name:
    Richard
    Laughlin,N.V
    Vehicle:
    trd sport 4x4 w/towpkg
    aFe prodry,Dynomax ultra flo ss,Scangauge2,Demello front bumper,BudBuilt skids,sliders(local)AllPro rear bumper,Wet O's cobalt blu,w/halfpiping,TRD logo in gold,R/L hood struts,5150's@10"aal 3 pack,T/C uca,Light racing c/o,1"diff.drop,de-badged,
    Read #13.kit instal
     
    Ridingontrd, Oct 22, 2008
    #13
  14. Oct 22, 2008 at 7:44 PM
    #14
    LonghornTaco

    #14
    LonghornTaco [OP] Can you pass the bailout please?

    Joined:
    Oct 6, 2008
    Member:
    #9763
    Messages:
    3,318
    Gender:
    Male
    First Name:
    Jason
    Minnesota
    Vehicle:
    Black 09 4x4 TRD Off Road Doublecab
    3" ToyTec coilover lift on Bilstein 5100s, Total Chaos UCAs, ToyTec diff drop, Scangauge II, 4D MagLite mounted on the drivers seat, Painted engine cover, Painted calipers (red), Painted skid plate (red) Valentine 1 radar detector hard wired, Damplifier Pro on the floor, back wall and doors, Luxury Liner Pro on the floor and doors, Kenwood DNX8120, 2 Pioneer TS-SW1041D 10" shallow mount subs, 2 Pioneer PRS-D4200F 1200W amps, Mr Marv sub enclosure, Hybrid Audio Clarus 6.5" components in the front doors, Alpine 5.25" coaxials in the rear doors, A.R.E. LSII fiberglass tonneau cover, All Pro bumper, All Pro sliders, Wet Okole seat covers, Sockmonkey Mountain badges, PIAA 510 SMR Driving Lights, Warn M8000 Winch, Bud Built skids
    The adjustable coilovers say they will adjust from 1.5" to 3.5". I wanted to go to the full 3.5". However, will setting this to .85 make me go to 4.35" or is the 3.5" supposed to be WITH the .85"?
     
    LonghornTaco, Oct 22, 2008
    #14
  15. Oct 22, 2008 at 7:45 PM
    #15
    chris4x4

    #15
    chris4x4 With sufficient thrust, pigs fly just fine. Moderator

    Joined:
    May 8, 2008
    Member:
    #6497
    Messages:
    112,751,526
    Gender:
    Male
    First Name:
    FlimFlubberJAM
    Tenoe, AZ
    Vehicle:
    2019 Rubicon 4 Door,
    4.10 gears, sliders, and lots of buttons.
    If you go to 3.5" wave "Bye bye" to your CV's
     
    chris4x4, Oct 22, 2008
    #15
  16. Oct 22, 2008 at 7:47 PM
    #16
    LonghornTaco

    #16
    LonghornTaco [OP] Can you pass the bailout please?

    Joined:
    Oct 6, 2008
    Member:
    #9763
    Messages:
    3,318
    Gender:
    Male
    First Name:
    Jason
    Minnesota
    Vehicle:
    Black 09 4x4 TRD Off Road Doublecab
    3" ToyTec coilover lift on Bilstein 5100s, Total Chaos UCAs, ToyTec diff drop, Scangauge II, 4D MagLite mounted on the drivers seat, Painted engine cover, Painted calipers (red), Painted skid plate (red) Valentine 1 radar detector hard wired, Damplifier Pro on the floor, back wall and doors, Luxury Liner Pro on the floor and doors, Kenwood DNX8120, 2 Pioneer TS-SW1041D 10" shallow mount subs, 2 Pioneer PRS-D4200F 1200W amps, Mr Marv sub enclosure, Hybrid Audio Clarus 6.5" components in the front doors, Alpine 5.25" coaxials in the rear doors, A.R.E. LSII fiberglass tonneau cover, All Pro bumper, All Pro sliders, Wet Okole seat covers, Sockmonkey Mountain badges, PIAA 510 SMR Driving Lights, Warn M8000 Winch, Bud Built skids
    Really? Does it increase the angle too much or something?
     
    LonghornTaco, Oct 22, 2008
    #16
  17. Oct 22, 2008 at 7:47 PM
    #17
    Ridingontrd

    #17
    Ridingontrd Well-Known Member

    Joined:
    May 7, 2008
    Member:
    #6459
    Messages:
    7,945
    Gender:
    Male
    First Name:
    Richard
    Laughlin,N.V
    Vehicle:
    trd sport 4x4 w/towpkg
    aFe prodry,Dynomax ultra flo ss,Scangauge2,Demello front bumper,BudBuilt skids,sliders(local)AllPro rear bumper,Wet O's cobalt blu,w/halfpiping,TRD logo in gold,R/L hood struts,5150's@10"aal 3 pack,T/C uca,Light racing c/o,1"diff.drop,de-badged,
    You don't add in the .85. Ref the second line of the instal instruct.
     
    Ridingontrd, Oct 22, 2008
    #17
  18. Oct 22, 2008 at 7:48 PM
    #18
    chris4x4

    #18
    chris4x4 With sufficient thrust, pigs fly just fine. Moderator

    Joined:
    May 8, 2008
    Member:
    #6497
    Messages:
    112,751,526
    Gender:
    Male
    First Name:
    FlimFlubberJAM
    Tenoe, AZ
    Vehicle:
    2019 Rubicon 4 Door,
    4.10 gears, sliders, and lots of buttons.
    Yes. At 3" your pushing it. Above that, and carry extras
     
    chris4x4, Oct 22, 2008
    #18
  19. Oct 22, 2008 at 7:48 PM
    #19
    Ridingontrd

    #19
    Ridingontrd Well-Known Member

    Joined:
    May 7, 2008
    Member:
    #6459
    Messages:
    7,945
    Gender:
    Male
    First Name:
    Richard
    Laughlin,N.V
    Vehicle:
    trd sport 4x4 w/towpkg
    aFe prodry,Dynomax ultra flo ss,Scangauge2,Demello front bumper,BudBuilt skids,sliders(local)AllPro rear bumper,Wet O's cobalt blu,w/halfpiping,TRD logo in gold,R/L hood struts,5150's@10"aal 3 pack,T/C uca,Light racing c/o,1"diff.drop,de-badged,
    You have the diff drop right??
     
    Ridingontrd, Oct 22, 2008
    #19
  20. Oct 22, 2008 at 7:49 PM
    #20
    LonghornTaco

    #20
    LonghornTaco [OP] Can you pass the bailout please?

    Joined:
    Oct 6, 2008
    Member:
    #9763
    Messages:
    3,318
    Gender:
    Male
    First Name:
    Jason
    Minnesota
    Vehicle:
    Black 09 4x4 TRD Off Road Doublecab
    3" ToyTec coilover lift on Bilstein 5100s, Total Chaos UCAs, ToyTec diff drop, Scangauge II, 4D MagLite mounted on the drivers seat, Painted engine cover, Painted calipers (red), Painted skid plate (red) Valentine 1 radar detector hard wired, Damplifier Pro on the floor, back wall and doors, Luxury Liner Pro on the floor and doors, Kenwood DNX8120, 2 Pioneer TS-SW1041D 10" shallow mount subs, 2 Pioneer PRS-D4200F 1200W amps, Mr Marv sub enclosure, Hybrid Audio Clarus 6.5" components in the front doors, Alpine 5.25" coaxials in the rear doors, A.R.E. LSII fiberglass tonneau cover, All Pro bumper, All Pro sliders, Wet Okole seat covers, Sockmonkey Mountain badges, PIAA 510 SMR Driving Lights, Warn M8000 Winch, Bud Built skids
    yep
     
    LonghornTaco, Oct 22, 2008
    #20
Page 1 of 2

Products Discussed in

Mobil 1 104361 75W-90 Synthetic Gear Lube - 1 Quart (Pack of 2)
$29.67
VIAIR 88P Portable Compressor Kit (12V, 120 Psi, Forup to 33" Tires)
$90.01
Moog 81102 Coil Spring Set
$165.95
ENERGY SUSPN Energy Suspension 8.10106G Rack & Pinnion Bushing Set
$64.78
Genuine Toyota 4Runner TRD PRO Matte Black Wheels PTR20-35110-BK (Fits: 4Runner - Tacoma - FJ Cruiser) (4)
$1,024.99
M18 Cordless Lithium-Ion 6-1/2" Circular Saw - 2630-20 - ( MILWAUKEE ) - BARE TOOL
$79.00
Philips 9003 MotoVision Motorcycle and Powersport Replacement Headlight Bulb, 1 Pack
$22.10
MOOG K80827 Front Lower Suspension Ball Joint for Toyota Tacoma
$23.43
Detroit Axle - 2 Front Lower Ball Joints for 2005-2019 Toyota Tacoma Lower Ball Joint 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 Replacement
$26.72
3M VHB 100x200mm~ (4" X8") Double Sided Foam Adhesive Sheet Tape 5952 Automotive Mounting Industrial Grade Very High Bond 5952 (1 Sheets 100x200mm)
$7.89
Lexus Genuine Factory 2 EMBLEM NUTS 90183-06044
$8.99
MOOG K90258 Front Left Lower Suspension Ball Joint for Toyota Tacoma
$48.78
OMT Heavy Duty Ball Joint Press & U Joint Removal Tool Kit with 4x4 Adapters, for Most 2WD and 4WD Cars and Light Trucks
$48.99
MOOG K200119 Suspension Control Arm Bushing Kit for Toyota Tacoma
$24.28
CRC 03007 3-36 16oz Multi-Purpose Lubricant and Corrosion Inhibitor Spray Bottle
$24.62
APDTY 035181 Rear Leaf Spring Insert 20870046
$24.78
10" Vise Grips Locking Plier Sheet Metal Clamp Tool
$23.99
Seaboard High Density Polyethylene Sheet, Matte Finish, 1/2" Thick, 12" Length x 24" Width, Black
$41.23
ARB EL46XL EXTRA LEAF SPRING
$44.00
Daystar, Toyota FJ Cruiser 1.5" Rear Lift Kit, fits 2007 to 2014 2/4WD, all transmissions, all cabs KT09127BK, Black
$45.16
Orion Motor Tech OMT 5-in-1 Ball Joint Separator, Pitman Arm Puller, Tie Rod End Tool Set for Front End Service, Splitter Removal Kit (RD06)
$44.09
Supreme Suspensions - Heavy Duty Coil Spring Compressor Tool with Clamps - Can Cooler Included with Purchase
$45.00
Handor Coil Spring Compressor Tool Automotive 2 PCS Ultra Rugged Strut Spring Compressor Tool, Heavy Duty Macpherson Strut Spring Compressor Set
$37.99
KYB SM5184 - Strut mount
$37.49
Front Suspension Lift Kit - 1.5" Lift - Compatible with 2005-2021 Toyota Tacoma (6-Lug), 2003-2021 4Runner, 2007-2014 FJ Cruiser (4WD) - Leveling Kit Strut Upper Top Aluminum Spacers Accessories
$39.78
Gabriel G63494 White Ultra Truck Shock, 1 Pack
$39.78
OEMTOOLS 25550 MacPherson 10.75" Strut Spring Compressor, Set of 2 Universal Spring Compressor Tools, 9.75" Maximum Safe Opening
$39.49
Supreme Suspensions - 1" Rear Lift Blocks for Toyota Tacoma/Tundra/IFS Pickup/IFS T100 2WD/4WD - High-Strength Steel Rear Lift Blocks 9/16th Pin - Can Cooler Included with Purchase
$39.95
Prothane 19-1751 Super Grease Tube - 14 oz.
$50.62
FK Bearings WSSX16T Spherical Bearing with Teflon, 1" (1-3/8 Wide), 1 Pack
$54.99
Icon Billet Aluminum Sway Bar Relocation Blocks Kit 611030
$51.45
Lincoln 1134 Extra Heavy Duty Pistol Grip Grease Gun, 6" Rigid Extension, Dual Lip Follower, Variable Stroke Mechanism, 18 Whip Hose with Coupler
$51.30
Daystar KU09017BK 3" Tall x 4-1/2" Long x 2-1/2" Wide Bump Stop
$54.99
Macnaught K32 Pistol Grip Grease Gun with 10 Year Performance Warranty - with NPT Whip (K32-01)
$57.00
Powerbuilt 3 Ton, Bottle Jack and Jack Stands in One, 6000 Pound All-in-One Car Lift, Heavy Duty Vehicle Unijack, 640912
$59.99
ACDelco Professional 45D2266 Front Passenger Side Lower Suspension Ball Joint Assembly
$59.22
Shankly Spring Compressor Tool - Heavy Duty Build, Ultra-Rugged Coil Spring Compressor Tool or Strut Spring Compressor Strong and Durable ATV Spring Compressor Tool
$59.99
2-1/2" Wide MEGA-DUTY Axle LEAF SPRING REBOUND CLAMPS - SET OF FOUR (4) (OFF-ROAD VEHICLES)
$59.99
ARB Bush Kit OME Shackle Tacoma (OMESB121)
$39.81
Milton (S-3101) Pistol Grease Gun - High Pressure, High Volume
$38.65
ICON 198000 Spanner Wrench for Coil-Over Shock
$43.94
MOOG K100127 Alignment Caster / Camber Kit for Toyota Tacoma
$40.70
To Top