Seats Removed, Now Not Starting

Need some help...

I pulled my seats to install seat heaters. I put everything back together and now it won't start. I'm getting the traction control and battery lights, and after a few seconds the air bag light. I tried disconnecting the battery for about 10 minutes but it didn't help.

Is there anything I can do to get it running again? Or am I looking at a trip to the dealer?

 

Did you remember to plug in the seat sensors?

 

Yep and I double checked them to be sure.

 

Maybe you blew a fuse on the circuit you tapped into. Do you have an OBD reader?

 

Does it crank over and not fire, just a click, or nothing at all??

Im wondering if you just drained the battery running the dome light all day while you took the seats out.. Or if you made a mistake when wiring the seat warmers in.

I cant really see why unplugging the seats would do anything more than a few lights related to the passenger seatbelt

 

I have an adapter but haven't used it on the Tacoma before. I haven't wired the heaters up yet, I just installed them on the seats and put them back in.

 

An adapter? Also the more info you can provide, like my previous questions, the quicker people on here can probably help ya out

 

It cranks but doesn't fire. It doesn't even act like it wants to fire. I did turn off the dome light before I started.

 

Sorry SR-71A. I have a Carly OBD2 adapter that I bought for my BMW. I haven't tried it in the Tacoma. Their app isn't cheap (but many be cheaper than a trip to the dealer).

 

The Carly reader I have won't work on the Tacoma. Their devices must be vehicle specific, the demo software won't recognize it.

 

Just for shits try this.
Get in the truck.
Lock the truck with fob
Unlock with fob.
Open and close door.
Try to start.
Do,you have smart key ?

 

Thanks for the suggestion, Tacoma Mike, but no kewpie doll.

 

U have smart key ?

 

U have the right set of keys ?
Don’t laugh..

 

I’d go back and verify all the wire harnesses that you disconnected got fully reconnected.

 

Tacoma Mike, I do not have a smart key. Same key on my key ring since day one.

road2cycle, that was the first thing I checked when it wouldn't start.

 

Ok one last question
Does the check engine light comes on when you turn the key on ?

 

I drive these things around with no seats in them sitting on a milk crate.

I’ll have air bag lights but that’s about it.

Something I can’t fathom must have happened weather you shorted a circuit or something.
Check all your fuses. Under hood and dash.
Sorry I can’t help you more but I’m not there..

 

Do you hear the fuel pump whir when you turn the key to the second position?