265s and spacer?

Anyone have a pic running 265 75 16s with a spacer and no lift? Wondering what this would look like pulling the wheel out a little bit

 

I'd like to see this as well...I've been contemplating the same thing.

 

This is on my buddies TRD pro with 1.25" spacers.

 

Bad pics but 265/75r16 on 1.25" wheel spacers before I installed lift.

 

3in spacer diff drop and aal rear. Stock wheels and tires.

 

No rubbing before the lift with turning?

 

And will spacers have a chance at causing rubbing at turns??

 

What wheels are you running?

 

I think you missed the mark. OP is talking about wheel spacers on stock suspension. Not suspension spacers on stock wheels.

 

Wildpeaks 265 75 16

 

I think it would make it look a little more beefy with tires out more

 

Good tires. But what wheels do you have?

 

Factory sr5 black

 

Ok. I noticed they were black in your avatar pic but wasn’t sure what they were. The TRD Pro wheels stick out a little further than the SR and OR. Yours have the same offset as JaTe pictured above so you would have the same look.

I think your truck looks great as is but the spacers definitely couldn’t hurt. Once I lifted mine I kinda feel like the tires look tucked in too far so I need to get some too.

 

I did not rub at all before lift. My buddy had a 16 DCSB Sport and he rubbed with 265/70r17 and 1.25" wheel spacers and no lift. So I guess it depends on the tires and how aggressive the treads are.

 

It looks proper AF. Low and wide with great ground clearance.

 

Another shot. The wheels sit a little bit outside of the fender flairs with the TRD Pro rims. With the TRD OR rims I had on my truck before they would sit a little more out.

 

Any adverse effects of running spacers apart from getting the truck a bit dirtier?

 

That’s adverse? I like to think of the dirt as extra paint protection.