What Have You Done To Your 2nd Gen Tacoma Today?

Seat spacers in. Thanks @olecoot for the solid craftsmanship & newly aligned comfort

 

Not a mod per se, but I've been looking for better storage solutions for a while now. I've always used cheap plano boxes that keep falling apart. Went with these frontrunner boxes. I can stack 4 where I had one plano box and makes sorting much easier..

 

New wheels and tires!


255/85/16 Cooper ST Maxx on 16x7 FJ wheels and yes, I'm keeping the center caps off on purpose because I like the contrast.

 

I got them off EBay. They look nice and were cost effective. They are definitely thin and by no means heavy duty. Just needed something cheap that looked good so my daughter can get in the truck easily

 

Here’s a couple pics

 

Awesome, thanks a lot! I was looking at the same ones on ebay to replace my chrome ones, but weren't sure if they hang too low. I was hoping to find something like yours that don't droop down to far and hide the pinch weld. How low do they hang?

These are my current ones:

 

I don’t think they hang too low. They are about 8” from the bottom of the cab. Hey have a sort of wrinkle powder coating. They look nice but like I said they are definitely in the thinner side. Wouldn’t recommend if you’re gonna beat and bang em up on rocks and such

 

Appreciate it, thanks!

 

I vote Red body color

 

Installed some tweeters (had to add a bit of glue passenger side since the tweeter arrived with a slight shake in it’s mount). Also extended my ARB coupler and bedside plug to maintain access with my DECKED system that I put in last week. Mounted up the 60” hi lift jack and redid the axe/shovel mount!

 

Installed some 5100's with a Headstrong Offroad 2" Coils up front, and a 1.5'' Deaver AAL paired with 2 degree shims in the back. Also new brake pads up front. Sitting up at the dealer right now for an alignment tomorrow morning, and to replace the outter tie rod I buggered up by accident yesterday.

Before:


After:

 

Is it louder? I don't understand why my TRD exhaust needs to be loud.

 

About to install this bundle of goodies.
Maybe finally get around to installing my Core shifters, Hurst shifter while I’m at it!

 

If u use upol raptor liner, you can tinted to match your color. I did my bumpers, mirrors and door handles silver streak mica and it turned out awsome, for about 100 bucks

 

This dremal ain't cutting it , putting some pod lights in the bumper

 

Have you thought about doing a satoshi grill mod?

 

These happened today.

Might need to pull the driver side fender in a bit to close that gap.

The roll bar was such a pain in the ass, and it's still not finished. I stripped a nut and have to tap it out. I need to drill some wider holes to get some more wiggle room to get everything lined up. But it's on for now.

 

Spent a few hours cleaning up my ride yesterday. Still looks and runs great after 11 years and 178,000 miles.

 

Eventually, yes. I’ve got my mind on a couple other things first. It only cost like $20 to paint the grill.

 

Rock lights installed