What have you done to your Tacoma today? 1st Gen Edition

Love the bottle opener. Freakin’ awesome.

 

Where have you been sourcing the tubes?

Clean wiring! What fuse block is that?

 

I drove mine 300 miles today.

 

Huh... He said he broke all his shit using 18 in coils. Did you skip a paragraph or 2 before commenting.

 

yes but before he said he is switching to 16s. Which is standard on a 8'' shock for Long travel which he has.

An 18'' coil will work fine but needs to be a much lower rate as it's so long it gets preloaded about an inch and a half even with the collars all the way up.


So....no I did not skip a paragraph. I actually know what Im talking about....some times.

 

Kevin, what did you use to clean your headlights? Looks brand new. Thanks

 

Cleaned & recharged the filter on the Hot Air Intake some joker put on this truck. Need to find a stock air box!

 

What year of truck is it?

 

I love when you can pivot the entire truck on it's frame or sliders. Solid work dude.

 

It’s off Amazon, it’s a 10 fuse block made by Online LED Store.

 

01

 

I have an air box for the older trucks you could have, you’d have to get the Volvo maf thing to make it work.

https://www.tacomaworld.com/threads...1997-to-1998-3-4-supercharger-upgrade.542496/

 

that’s way batter than a Miata (Sorry, Chris).

A good pivot off the sliders!

 

I’m trying to remove the glass out of the driver door. Anyone know how to do this? Am I going to have to remove all this rubber seal?

 

the run channel?
is it power or manual window
i have only ripped a run channel out at a salvage lot, window was already removed

 

Automatic. Yes, I guess the run channel. If I’m going to have to do that I’ll wait until I have a whole day. I don’t have the time to mess with getting it out and in again. Sounds like a pain in the ass.

I could only find videos on 2nd gen window removal. And those just slip right out without having to mess with the seals.

 

frame inspection and internal frame hosing, half-assed cleaning on drivers side of the $4k pig
that floor jack caught some 3 wheel motion ... ... ...

 

Typically yes you have to remove the run. Sometimes the window track inside the door too (2 bolts) then it’s sliding the window out typically at a slight angle.
I haven’t done one on a taco. But plenty of older camrys and such and that’s how I get them out

 

had the skull right under there in the crush zone, begging the jack not to give way, squirming underneath for my wretched life
thankfully i did not use my wrist as leverage to hobble up like last time, that really hurt and left me with bum wrist for a spell

 

That floor jack has same much flex as your truck