1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: FS: Stinger Speedwire/Metra Harness for Connecting Aftermarket Amplifier to OEM Headunit Undercover Flex Bed Cover $400 WTB: Stock License Plate Light Housings Brand New Bilstein 5160 remote reservoir shocks and billet piggyback clamps SOLD! Finally! 6’ White SnugTop W/ Solar panel $600 Redline Tuning EZDown

Cam gears for V6. Add power AND mpg

Discussion in '2nd Gen Tacoma Parts Marketplace (2005-2015)' started by mightytacoman, Jul 7, 2019.

Page 6 of 109
  1. Sep 9, 2019 at 10:57 AM
    #101
    mightytacoman

    #101
    mightytacoman [OP] Mighty-known Member

    Joined:
    Apr 3, 2013
    Member:
    #101270
    Messages:
    2,408
    Gender:
    Male
    First Name:
    Kel
    Vehicle:
    4.5L 1grfe
    Brian Crower stroker kit, Carrillo pistons moly/ceramic coated, BC sportsman rods, arp s2000 head bolts, Darton M.I.D sleeves, Kelford race cams, Magnusson supercharger, hp tuner tuned, 650cc flow matched fuel injectors, CSF radiator, Walbro 255 fuel pump. pulleyboys quick change pulley with 2.3", fpr mod, NST crank, water and alternator pullies, 160° mishimoto thermostat. Puma On-board air, Radflo CDC ext coilovers with 14" 700# springs, extended length rear Radflo shocks with CDC, Dakar leak pack, Brute Force Fab front bumper galvanized and powder coated, DTRL mod, yellow fogs, fog anytime mod, relocated rear differential breather, synthetic fluids, custom airbox, tundra sized intake. 76mm throttle body, secondary air filter removed, Airflow snorkel, 4x innovation sliders powder coated, URD equal length headers, DT y-pipe, Aero-Turbine 2525xl exhaust dumped over axle, seat belt chime disabled, Warn 8000i winch, 1- 20" slim light bar in grill, 42" curved roof light both with custom brackets. Mesh grill, Brute Force Fab rear bumper with extra reverse lights, u bolt flip kit, SS extended brake lines, hockey puck bump stop extension, AT shackle flip kit, Light Racing UCA's, 4crawler 1.5" bodylift. custom built front and mid skid plates, re-geared to 4.56s, windows tinted 25%, Sony stereo, 8" skar sub-woofer, 1000 watt mono amp, retrofit headlights with legal demon eye, Kryptek Marathon seat covers. North Star agm 27f battery, Helo 791 rims, 315/75/r16 Mt/r ARB front air locker
    I thought the crank pulley sometimes leaked. Hopefully someone else can chime in.
     
    mightytacoman, Sep 9, 2019
    #101
  2. Sep 9, 2019 at 11:01 AM
    #102
    DesertRatliff

    #102
    DesertRatliff Well-Known Member

    Joined:
    Jan 14, 2012
    Member:
    #70618
    Messages:
    2,383
    Gender:
    Male
    Mt. Hood, OR
    Vehicle:
    Mas Tacos Por Favor
    Man...I've been trying to chase down a leak for weeks now. I've got the NST crank and fan pulley, but had enough oil on my inner driver CV to think that my re-seal/ECGS bushing job didn't work. I even ordered a new seal and went down to town to buy gear oil today to change it this afternoon, but dang does it ever look like it's leaking from the crank now that I look more closely. Thanks for the heads up!
     
    DesertRatliff, Sep 9, 2019
    #102
    mightytacoman[QUOTED][OP] likes this.
  3. Sep 9, 2019 at 11:02 AM
    #103
    DocME

    #103
    DocME Well-Known Member

    Joined:
    Aug 24, 2018
    Member:
    #263956
    Messages:
    1,583
    Gender:
    Male
    California
    Vehicle:
    '07 FJ Cruiser
    TRD S/C, UCON, 61# inj, 2.5 pulley, 7th inj, Roostfactor Y Pipe, URD exhaust, WAT Nomad Valve body, Dana 60, DK LT, JD FAB LCA mounts, custom roof rack...and way too many others.
    The original NST pulleys didn't include a steel sleeve over the aluminum hub, so the spring tensioned crank seal would etch a path for oil there. They now come with steel sleeves over the aluminum hub to prevent premature wear.

    The funny thing is this happens with the stock steel dampner hub too. Both hubs I've pulled have had heavy scar-age there. Clean them up with some emerycloth and a new seal. You should be GTG.
     
    DocME, Sep 9, 2019
    #103
    12TRDTacoma and Torspd like this.
  4. Sep 9, 2019 at 11:04 AM
    #104
    mightytacoman

    #104
    mightytacoman [OP] Mighty-known Member

    Joined:
    Apr 3, 2013
    Member:
    #101270
    Messages:
    2,408
    Gender:
    Male
    First Name:
    Kel
    Vehicle:
    4.5L 1grfe
    Brian Crower stroker kit, Carrillo pistons moly/ceramic coated, BC sportsman rods, arp s2000 head bolts, Darton M.I.D sleeves, Kelford race cams, Magnusson supercharger, hp tuner tuned, 650cc flow matched fuel injectors, CSF radiator, Walbro 255 fuel pump. pulleyboys quick change pulley with 2.3", fpr mod, NST crank, water and alternator pullies, 160° mishimoto thermostat. Puma On-board air, Radflo CDC ext coilovers with 14" 700# springs, extended length rear Radflo shocks with CDC, Dakar leak pack, Brute Force Fab front bumper galvanized and powder coated, DTRL mod, yellow fogs, fog anytime mod, relocated rear differential breather, synthetic fluids, custom airbox, tundra sized intake. 76mm throttle body, secondary air filter removed, Airflow snorkel, 4x innovation sliders powder coated, URD equal length headers, DT y-pipe, Aero-Turbine 2525xl exhaust dumped over axle, seat belt chime disabled, Warn 8000i winch, 1- 20" slim light bar in grill, 42" curved roof light both with custom brackets. Mesh grill, Brute Force Fab rear bumper with extra reverse lights, u bolt flip kit, SS extended brake lines, hockey puck bump stop extension, AT shackle flip kit, Light Racing UCA's, 4crawler 1.5" bodylift. custom built front and mid skid plates, re-geared to 4.56s, windows tinted 25%, Sony stereo, 8" skar sub-woofer, 1000 watt mono amp, retrofit headlights with legal demon eye, Kryptek Marathon seat covers. North Star agm 27f battery, Helo 791 rims, 315/75/r16 Mt/r ARB front air locker
    Justin or whoever can make some adjustments to your tune to take advantage of the additional timing. It will help some but isn't a NEED.
     
    mightytacoman, Sep 9, 2019
    #104
    Torspd and JustDSM like this.
  5. Sep 9, 2019 at 11:11 AM
    #105
    DesertRatliff

    #105
    DesertRatliff Well-Known Member

    Joined:
    Jan 14, 2012
    Member:
    #70618
    Messages:
    2,383
    Gender:
    Male
    Mt. Hood, OR
    Vehicle:
    Mas Tacos Por Favor
    PM incoming so I don't derail the thread.
     
    DesertRatliff, Sep 9, 2019
    #105
    JustDSM likes this.
  6. Sep 9, 2019 at 11:45 AM
    #106
    Torspd

    #106
    Torspd Tor-nication

    Joined:
    Sep 18, 2009
    Member:
    #22958
    Messages:
    26,303
    Gender:
    Male
    First Name:
    Tor
    The Great America!
    Vehicle:
    MMVI 4.4L 4x4 Access Cab
    Torspd Custom Turbo kit [] Borg Warner 9180EFR Turbo [] Haltech Elite 2500 [] TiAL Q BOV [] TiAL V44 Wastegate @ 15psi [] CP Pistons [] CP Carrillo Rods [] ARP Head studs [] ARP Main Studs [] ARP Header - Head Studs [] Ported Heads w/ 1mm oversized valves intake/exhaust [] Brian Crower Forged Stroker Crank [] Darton M.I.D. Sleeved Block [] Kelford Camshafts [] Torspd 160* T-stat mod [] APR Large Fuel Rail [] Walbro 460 LPH E85 Fuel Pump [] FueLab FPR [] APR T56 Conversion Kit [] KP RACING Built T56 [] McLeod Racing Custom Twin Disk Clutch [] One Piece Aluminum Driveshaft [] MGW Shifter [] Custom lowering kit [] Ohlins Front Coilovers [] QA1rear shocks [] Custom Ron Davis Radiator [] Dual SPAL Electric Fans []
    Wrinkle powder coat. He can answer the rest.
     
    Torspd, Sep 9, 2019
    #106
  7. Sep 9, 2019 at 12:19 PM
    #107
    Torspd

    #107
    Torspd Tor-nication

    Joined:
    Sep 18, 2009
    Member:
    #22958
    Messages:
    26,303
    Gender:
    Male
    First Name:
    Tor
    The Great America!
    Vehicle:
    MMVI 4.4L 4x4 Access Cab
    Torspd Custom Turbo kit [] Borg Warner 9180EFR Turbo [] Haltech Elite 2500 [] TiAL Q BOV [] TiAL V44 Wastegate @ 15psi [] CP Pistons [] CP Carrillo Rods [] ARP Head studs [] ARP Main Studs [] ARP Header - Head Studs [] Ported Heads w/ 1mm oversized valves intake/exhaust [] Brian Crower Forged Stroker Crank [] Darton M.I.D. Sleeved Block [] Kelford Camshafts [] Torspd 160* T-stat mod [] APR Large Fuel Rail [] Walbro 460 LPH E85 Fuel Pump [] FueLab FPR [] APR T56 Conversion Kit [] KP RACING Built T56 [] McLeod Racing Custom Twin Disk Clutch [] One Piece Aluminum Driveshaft [] MGW Shifter [] Custom lowering kit [] Ohlins Front Coilovers [] QA1rear shocks [] Custom Ron Davis Radiator [] Dual SPAL Electric Fans []
    Always add Grease to crank seal and or crank pulley sleeve.
     
    Torspd, Sep 9, 2019
    #107
    12TRDTacoma and DocME like this.
  8. Sep 9, 2019 at 1:54 PM
    #108
    Lucario Runner

    #108
    Lucario Runner Resident Truck/SUV racer

    Joined:
    Jun 29, 2011
    Member:
    #59067
    Messages:
    7,182
    Gender:
    Male
    First Name:
    Robert
    San Antonio, TX or nearest race track
    Vehicle:
    06 Toyota 4Runner
    AFE stage II intake, APR X1, URD 70mm Throttle Valve (ported and knife edged), NST intake manifold spacer, URD spec U headers, Denso IKH20, URD fuel pump, APR fuel rail, URD Y pipe, URD spec u catback, lightweight water pump pulley, Greddy sandwich cooler plate, Earls oil cooler, IPT valve body, FJ TRD shocks, Cusco front and rear sway bars, Energy Suspension rear track rod bushings and rear link bushings, Carbotech pads, Stoptech ss brake lines, Stoptech slotted rotors, Motul 600 rbf, Limited Grill, Painted hatch cover by me, Painted valve covers by me, Cobra CB, TRD rad and oil cap, Escort 8500, Autometer oil psi and temp gauges, AEM wideband afr gauge, Flexpod, Pioneer 400w speakers.
    Valve covers were from my spare engine. It's a wrinkle powder coat.
     
    Lucario Runner, Sep 9, 2019
    #108
  9. Sep 9, 2019 at 2:12 PM
    #109
    Scott B.

    #109
    Scott B. Well-Known Member

    Joined:
    Nov 11, 2014
    Member:
    #142118
    Messages:
    4,465
    Gender:
    Male
    First Name:
    Scott
    Georgia
    Vehicle:
    2015 ACLB SR5 4x4 Expo
    Thanks.

    I'd like to do something to my valve covers when I install these - spare sets are quite expensive. :(
     
    Scott B., Sep 9, 2019
    #109
  10. Sep 9, 2019 at 2:32 PM
    #110
    DiamondW

    #110
    DiamondW Stockblocker

    Joined:
    Feb 1, 2019
    Member:
    #281480
    Messages:
    2,206
    Gender:
    Male
    First Name:
    Kent
    Gonzales Co. TX
    Vehicle:
    ‘06 AC SR5, ‘17 Tundra, ‘14 GX460
    On P265/70R17 and about 2” lift all around I’m getting 20.5 to 21 every tank. I am running URD LT headers and a tune from JustDSM though.

    I would by far give the gears best bang for the buck of all my engine mods. My idle is much smoother and the power band is much more consistent. I’ll never own a 1GR-FE that doesn’t have them.

    I’ve got the alternator and water pump pulleys on the way from them, have for over six weeks:mad: I’m not running my truck as a tow/play truck without a balancer, but that’s just me. I’m gonna put a super damper on probably, as it is lighter than the factory, or so I’ve been told.
     
    DiamondW, Sep 9, 2019
    #110
    mightytacoman[QUOTED][OP] and Torspd like this.
  11. Sep 9, 2019 at 4:45 PM
    #111
    smelly621

    #111
    smelly621 Well-Known Member

    Joined:
    Feb 12, 2018
    Member:
    #244237
    Messages:
    648
    Gender:
    Male
    SF Bay Area
    Vehicle:
    2011 AC TRDOR 6MT
    It's DLX son!
    Have started thinking the same (but would also always want a tune now too).

    Question for OP @mightytacoman - do you see any issue with sending you my stock gears I just removed to get machined in case I get another rig in the future? (have an itch for a DCLB I can't seem to get rid of).
     
    smelly621, Sep 9, 2019
    #111
    DiamondW[QUOTED] likes this.
  12. Sep 10, 2019 at 5:24 AM
    #112
    mightytacoman

    #112
    mightytacoman [OP] Mighty-known Member

    Joined:
    Apr 3, 2013
    Member:
    #101270
    Messages:
    2,408
    Gender:
    Male
    First Name:
    Kel
    Vehicle:
    4.5L 1grfe
    Brian Crower stroker kit, Carrillo pistons moly/ceramic coated, BC sportsman rods, arp s2000 head bolts, Darton M.I.D sleeves, Kelford race cams, Magnusson supercharger, hp tuner tuned, 650cc flow matched fuel injectors, CSF radiator, Walbro 255 fuel pump. pulleyboys quick change pulley with 2.3", fpr mod, NST crank, water and alternator pullies, 160° mishimoto thermostat. Puma On-board air, Radflo CDC ext coilovers with 14" 700# springs, extended length rear Radflo shocks with CDC, Dakar leak pack, Brute Force Fab front bumper galvanized and powder coated, DTRL mod, yellow fogs, fog anytime mod, relocated rear differential breather, synthetic fluids, custom airbox, tundra sized intake. 76mm throttle body, secondary air filter removed, Airflow snorkel, 4x innovation sliders powder coated, URD equal length headers, DT y-pipe, Aero-Turbine 2525xl exhaust dumped over axle, seat belt chime disabled, Warn 8000i winch, 1- 20" slim light bar in grill, 42" curved roof light both with custom brackets. Mesh grill, Brute Force Fab rear bumper with extra reverse lights, u bolt flip kit, SS extended brake lines, hockey puck bump stop extension, AT shackle flip kit, Light Racing UCA's, 4crawler 1.5" bodylift. custom built front and mid skid plates, re-geared to 4.56s, windows tinted 25%, Sony stereo, 8" skar sub-woofer, 1000 watt mono amp, retrofit headlights with legal demon eye, Kryptek Marathon seat covers. North Star agm 27f battery, Helo 791 rims, 315/75/r16 Mt/r ARB front air locker
    Ya I can machine your stock gears buddy. I machined a set with around 200k on them. There is little to no wear on the teeth but you can see where the stock keyway is ever so slightly wider from wear.
     
    mightytacoman, Sep 10, 2019
    #112
    smelly621[QUOTED] likes this.
  13. Sep 19, 2019 at 7:10 AM
    #113
    mightytacoman

    #113
    mightytacoman [OP] Mighty-known Member

    Joined:
    Apr 3, 2013
    Member:
    #101270
    Messages:
    2,408
    Gender:
    Male
    First Name:
    Kel
    Vehicle:
    4.5L 1grfe
    Brian Crower stroker kit, Carrillo pistons moly/ceramic coated, BC sportsman rods, arp s2000 head bolts, Darton M.I.D sleeves, Kelford race cams, Magnusson supercharger, hp tuner tuned, 650cc flow matched fuel injectors, CSF radiator, Walbro 255 fuel pump. pulleyboys quick change pulley with 2.3", fpr mod, NST crank, water and alternator pullies, 160° mishimoto thermostat. Puma On-board air, Radflo CDC ext coilovers with 14" 700# springs, extended length rear Radflo shocks with CDC, Dakar leak pack, Brute Force Fab front bumper galvanized and powder coated, DTRL mod, yellow fogs, fog anytime mod, relocated rear differential breather, synthetic fluids, custom airbox, tundra sized intake. 76mm throttle body, secondary air filter removed, Airflow snorkel, 4x innovation sliders powder coated, URD equal length headers, DT y-pipe, Aero-Turbine 2525xl exhaust dumped over axle, seat belt chime disabled, Warn 8000i winch, 1- 20" slim light bar in grill, 42" curved roof light both with custom brackets. Mesh grill, Brute Force Fab rear bumper with extra reverse lights, u bolt flip kit, SS extended brake lines, hockey puck bump stop extension, AT shackle flip kit, Light Racing UCA's, 4crawler 1.5" bodylift. custom built front and mid skid plates, re-geared to 4.56s, windows tinted 25%, Sony stereo, 8" skar sub-woofer, 1000 watt mono amp, retrofit headlights with legal demon eye, Kryptek Marathon seat covers. North Star agm 27f battery, Helo 791 rims, 315/75/r16 Mt/r ARB front air locker
    bump up for views
     
    mightytacoman, Sep 19, 2019
    #113
  14. Sep 30, 2019 at 9:21 AM
    #114
    Capt. Obvious

    #114
    Capt. Obvious Fearless Keyboard Warrior

    Joined:
    Aug 4, 2014
    Member:
    #135396
    Messages:
    1,637
    Gender:
    Male
    First Name:
    Darrick
    Gig Harbor
    Vehicle:
    '12 DCLB TRD
    6" body lift, LEDs errwhere, Jesus mural on the hood
    Random question: how did it get established that 3° was the magic number? And not, say, 4°?
     
    Capt. Obvious, Sep 30, 2019
    #114
  15. Sep 30, 2019 at 9:23 AM
    #115
    mightytacoman

    #115
    mightytacoman [OP] Mighty-known Member

    Joined:
    Apr 3, 2013
    Member:
    #101270
    Messages:
    2,408
    Gender:
    Male
    First Name:
    Kel
    Vehicle:
    4.5L 1grfe
    Brian Crower stroker kit, Carrillo pistons moly/ceramic coated, BC sportsman rods, arp s2000 head bolts, Darton M.I.D sleeves, Kelford race cams, Magnusson supercharger, hp tuner tuned, 650cc flow matched fuel injectors, CSF radiator, Walbro 255 fuel pump. pulleyboys quick change pulley with 2.3", fpr mod, NST crank, water and alternator pullies, 160° mishimoto thermostat. Puma On-board air, Radflo CDC ext coilovers with 14" 700# springs, extended length rear Radflo shocks with CDC, Dakar leak pack, Brute Force Fab front bumper galvanized and powder coated, DTRL mod, yellow fogs, fog anytime mod, relocated rear differential breather, synthetic fluids, custom airbox, tundra sized intake. 76mm throttle body, secondary air filter removed, Airflow snorkel, 4x innovation sliders powder coated, URD equal length headers, DT y-pipe, Aero-Turbine 2525xl exhaust dumped over axle, seat belt chime disabled, Warn 8000i winch, 1- 20" slim light bar in grill, 42" curved roof light both with custom brackets. Mesh grill, Brute Force Fab rear bumper with extra reverse lights, u bolt flip kit, SS extended brake lines, hockey puck bump stop extension, AT shackle flip kit, Light Racing UCA's, 4crawler 1.5" bodylift. custom built front and mid skid plates, re-geared to 4.56s, windows tinted 25%, Sony stereo, 8" skar sub-woofer, 1000 watt mono amp, retrofit headlights with legal demon eye, Kryptek Marathon seat covers. North Star agm 27f battery, Helo 791 rims, 315/75/r16 Mt/r ARB front air locker
    It's what Urd found to work best. @dark vader trd pro had me do him a set at 4°. I wonder if he's installed them or not.
     
    mightytacoman, Sep 30, 2019
    #115
  16. Sep 30, 2019 at 10:31 AM
    #116
    Torspd

    #116
    Torspd Tor-nication

    Joined:
    Sep 18, 2009
    Member:
    #22958
    Messages:
    26,303
    Gender:
    Male
    First Name:
    Tor
    The Great America!
    Vehicle:
    MMVI 4.4L 4x4 Access Cab
    Torspd Custom Turbo kit [] Borg Warner 9180EFR Turbo [] Haltech Elite 2500 [] TiAL Q BOV [] TiAL V44 Wastegate @ 15psi [] CP Pistons [] CP Carrillo Rods [] ARP Head studs [] ARP Main Studs [] ARP Header - Head Studs [] Ported Heads w/ 1mm oversized valves intake/exhaust [] Brian Crower Forged Stroker Crank [] Darton M.I.D. Sleeved Block [] Kelford Camshafts [] Torspd 160* T-stat mod [] APR Large Fuel Rail [] Walbro 460 LPH E85 Fuel Pump [] FueLab FPR [] APR T56 Conversion Kit [] KP RACING Built T56 [] McLeod Racing Custom Twin Disk Clutch [] One Piece Aluminum Driveshaft [] MGW Shifter [] Custom lowering kit [] Ohlins Front Coilovers [] QA1rear shocks [] Custom Ron Davis Radiator [] Dual SPAL Electric Fans []
    Actually, for clarification, APR found it to be 3 degrees. URD used to work closely with APR.
     
    Torspd, Sep 30, 2019
    #116
    smelly621, Lucario Runner, JustDSM and 1 other person like this.
  17. Oct 5, 2019 at 4:51 PM
    #117
    TacoFergie

    #117
    TacoFergie Well-Known Member

    Joined:
    Dec 21, 2015
    Member:
    #172832
    Messages:
    1,302
    Gender:
    Male
    First Name:
    Chris
    Iowa
    Why did I have to find this!? I just did The HP Tuners yesterday via JustDSM. I had no intentions of modifying my engine till I got a lift put on...this is not helping my cause. I will have to wait though for now
     
    TacoFergie, Oct 5, 2019
    #117
    mightytacoman[OP] likes this.
  18. Oct 5, 2019 at 6:25 PM
    #118
    Torspd

    #118
    Torspd Tor-nication

    Joined:
    Sep 18, 2009
    Member:
    #22958
    Messages:
    26,303
    Gender:
    Male
    First Name:
    Tor
    The Great America!
    Vehicle:
    MMVI 4.4L 4x4 Access Cab
    Torspd Custom Turbo kit [] Borg Warner 9180EFR Turbo [] Haltech Elite 2500 [] TiAL Q BOV [] TiAL V44 Wastegate @ 15psi [] CP Pistons [] CP Carrillo Rods [] ARP Head studs [] ARP Main Studs [] ARP Header - Head Studs [] Ported Heads w/ 1mm oversized valves intake/exhaust [] Brian Crower Forged Stroker Crank [] Darton M.I.D. Sleeved Block [] Kelford Camshafts [] Torspd 160* T-stat mod [] APR Large Fuel Rail [] Walbro 460 LPH E85 Fuel Pump [] FueLab FPR [] APR T56 Conversion Kit [] KP RACING Built T56 [] McLeod Racing Custom Twin Disk Clutch [] One Piece Aluminum Driveshaft [] MGW Shifter [] Custom lowering kit [] Ohlins Front Coilovers [] QA1rear shocks [] Custom Ron Davis Radiator [] Dual SPAL Electric Fans []
    Wait you shall not!
     
    Torspd, Oct 5, 2019
    #118
  19. Oct 5, 2019 at 6:47 PM
    #119
    SpanishTaco

    #119
    SpanishTaco Well-Known Member

    Joined:
    Apr 7, 2019
    Member:
    #289352
    Messages:
    126
    Gender:
    Male
    CT
    Vehicle:
    2015 Blue DCSB TRD Sport
    You try to put your wallet away...and they pull you back in!
    DAMN YOU, TOYOTA WORLD!!!

    https://youtu.be/fvzdehnJA9k
     
    SpanishTaco, Oct 5, 2019
    #119
    TacoFergie[QUOTED] likes this.
  20. Oct 5, 2019 at 7:08 PM
    #120
    old55guy

    #120
    old55guy Well-Known Member

    Joined:
    Jul 9, 2016
    Member:
    #191623
    Messages:
    330
    Gender:
    Male
    First Name:
    mike
    Vehicle:
    2011 dcsb trd white
    none
    Ok I hope this makes sense On page one The stock gear timing dot is at 12:00 ? With the install of your gear the dot is at 7:00 ?
    I see the line you make to timing chain mark ! ( I assume that"s how you get the 3degs ) Am I thinking right ?
    Also would this Mod. still pass my California smog test ?
    Thank you very much for your R & D

    Update I get it now you modify a stock gear with a new slot !!!
    Bozo me !
     
    Last edited: Oct 5, 2019
    old55guy, Oct 5, 2019
    #120
Page 6 of 109
To Top