The SR thread, let's see them!

Here's my SR Utility. Put the flares on a while back, really changes the look of the truck.

 

Only the left side on at the moment for my testing, I will be using 3M if I decide they are permanent, not 100% convinced I like them.

Just an FYI, with all of the attachment points, there in no need to drill any holes in truck.

 

Looks good. Would add the foglights next.

 

I’m fully aware there’s no need to drill holes. I only asked because the OEM setup includes holes in the fender for the clips and was interested in which route you took since you didn’t specify in your original post.

 

Alrighty then...

 

Anyone running the Ion 171 wheels? And if so would you share pictures?

 

https://www.tacomaworld.com/threads/show-your-rims-and-tires.150771/page-43#post-16376395

These ?

 

Yeah! I just got back from the shop with my 2019 SR and they told me the 16x8 Ion 171s i wanted to go with, are rubbing on the calipers, I dont want to have to go to 17" and buy new tires as well. Anybody have any experiance with aftermarket calipers that would be thinner? it kind of looks like I'm out of luck with that style and staying with 16".

 

What's the offset and back space?
I ran 16x8 with 0 offset and 4.5 backspace. Don't have spacers and don't rub with 1.5" lift in the front and 265/75r16 tire.

 

-5 offset with 4.30 Backspace. They were only rubbing on the calipers according to what the shop was telling me.

 

Maybe it's not enough backspace, spacers might fix that

 

Found some G-fx TR16 wheels that are identical except for -6 offset, backspace is the same. Going purely off of their website model and sub model they are supposed to fit.

 

I took the day off to get some projects done, for the truck I decided to use the rest of my Noico to deaden the back wall of the cab.



I have a Kicker CompRT 43cwrt102 loaded 10” enclosure showing up tomorrow so I had to pull the panels out to trim the passenger side anyway.

 

Two SR beauts hanging out at the Kroger earlier this evening. Opposites attract right??

 

Cleaned her up and went out for a drive this weekend.

 

My 2019 SR 4x4 with modest upgrades.

 

2019 Access Cab with SX package, bought in SoCal almsot two months ago!

 

Took the fender flares back off and finally installed my Ray10’s with new rubber. Ordered the Silver TRD Center caps today. Going to trim a few things this weekend, 285/75/17’s are tight, but only rub a little in reverse tight turns. BMC will come shortly.

 

TIGHT TURNS? didn't think those were possible. Tried a U turn at a light the other day and couldn't make it. Next time I will try it in reverse!!

 

Looks good! I think the utilities look better without fender flares. After all, that's why you get a utility, all business no BS!